您要查找的是不是：
- impact strength rubber 增韧
- High impact strength with good processability, high stiffness. 高冲击强度,良好的加工稳定性,阻隔性强。
- Excellent Impact strength, Excellent resostamce to low temp. 冲击性优抗低温度。
- Maleic anhydride grafted polyethylene or ethylene-propylene-diene rubber used as compatibilizer improved impact strength and reduced percent of water absorption of polyamide 6/polyolefine blends. 以马来酸酐接枝聚乙烯和三元乙丙橡胶为界面相容剂,研制的尼龙6/聚烯烃共混物,提高了冲击强度,降低了吸水率。
- The integrative twine technology for making high strength rubber air-bag products is a new technology created originally by our factory. 整体缠绕船用气囊制造技术是我厂独创的新技术、工艺。
- Recommended for the formulations of powders with good impact strength. 用于生产高强度粉状涂料。
- The impact strength and the flame retardancy of the composites were tested. 并对复合材料的冲击强度、阻燃性能进行了测试。
- In general, a greater impact strength is required for more demanding, harder-to-cut materials. 一般来说,一个更大的影响力需要采取更为严格、艰苦地降低原料。
- However, always using higher impact strength diamond that is more expensive will not always benefit the operator. 总是用金刚石冲击强度更高,更加昂贵永远不会惠及经营。
- The ability of a diamond to withstand an impact load is typically referred to as diamond impact strength. 能否经受冲击负荷的钻石通常称为金刚石冲击强度。
- The testresults of impact strength, hardness, adhesive force of the cured layer showed thispolyester had better properties. 对固化膜的冲击强度、硬度及附着力等性能的测试结果表明，所合成的光敏不饱和聚酯的性能较好。
- The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength. 切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
- A foresaid structure made ASA had high notched Izod impact strength which was as high as 33kJ/m2. 上述结构赋予ASA以高抗冲性能,其缺口冲击强度最高可达33 kJ/m2。
- The CPE grated copolymer can increase the impact strength of the PVC/CPE blededs and the tensile strength remains high. 通过改变增容剂中单体用量、氮合量、增容剂用量等对共混物性能的影响作了探讨。
- The effects of toughener and filler on shearing strength and impact strength of epoxy adhesives were studied. 研究增韧剂、填料对环氧树脂胶粘剂剪切强度和冲击强度性能的影响。
- When VE is used to tough DAIP resin,mechanical properties such as impact strength of the resin is improved. 采用环氧丙烯酸酯 (VE)为间苯二甲酸二烯丙酯 (DAIP)树脂的增韧剂 ,体系的韧性得到改善。
- The impact strength of PVC/MCB(100/59) amounts to (68.1) kJ/m~2, much higher than that of PVC (only (4.6) kJ/m~2). PVC的冲击强度为4.;6kJ/m2;以PVC与SBS共碾磨产物(MCB)为增容增韧剂可使PVC/MCB(100/59)的冲击强度高达68
- The impact strength of their composites increases obviously and,being toughened with PSF,by a factor of 90%. 其复合材料的冲击强度明显提高,经聚砜增韧后提高了90%25。
- His strength in a crisis is an ace in the hole. 临危不惧是他的看家本领。
- Flexural strength, flexural modulus and impact strength of CF/BPR composites increase with increasing CF content. 随着破纤维含量的增加，CF/BPR复合材料弯曲强度、弯曲模量和冲击强度均逐渐增加；
