您要查找的是不是：
- Surface quality of hot dip plating Zn-Al alloy were further improved. 采用该合金助镀剂进行Zn Al合金热浸镀的样品 ,表面质量得到进一步改善。
- Application of induction channel furnace in aluminium melting and hot dip plating, its structure design and forecast are presented. 介绍有心感应炉在熔铝和热浸镀行业的应用及其结构设计特点和前景。
- The surface morphology and composition of Zn 5%Al RE coating hot dip plated on alloy steel wire was analyzed by means of metallography,SEM and EPMA. 本文采用金相显微镜、扫描电镜和能谱仪等设备分析了在Zn?5%25 Al?RE合金溶液中热浸镀中碳钢丝表面的组织形貌和成分。
- Keywords Hot Dip Plating;Flux Method;and Alumetizing Steel.; 热浸镀;熔剂法;渗铝钢;
- Effects of Rare Earth Chloride on Properties of Infusion of Assistant Plating for Hot Dip Plating 氯化稀土对热浸镀助镀剂性能的影响
- Application of Induction Channel Furnace in Aluminium melting and Hot Dip Plating 有心感应炉在熔铝和热浸镀行业的应用
- The Technology and Equiment of Hot Dip Plating Pb Sn Alloy on a Double Wall Brazed Tube 双层卷焊钢管热浸镀铅锡合金工艺与设备
- hot dip plating 热浸涂镀
- Surface Morphology of Zn-5%Al-RE Coating Hot Dip Plated on Alloy Steel Wire 热浸镀Zn-5%25Al-RE合金钢丝镀层的表面形貌
- A hot dip Zn 5%Al RE coating on high carbon steel wire is tested. 试验了在高碳钢丝表面上热浸镀Zn 5%25Al RE合金层。
- Pro-treatment technology of H3P04 anoxic method, double zincatingmethod andZn-Ni dip plating method were compared. 比较了磷酸阳极氧化法、二次浸锌法和浸镀Zn-Ni合金法三种预处理工艺，浸镀Zn-Ni合金法和前两种预处理工艺相比综合性能更好，在铝质材料表面可制得结合力良好，结晶细致，外观平整光滑的预镀Ni层。
- The Annealing Furnace is a key Equipment for any Hot Dip Galvanizing Line. 对于任何连续热镀锌线退火炉都是关键设备。
- Surface passivation by chromate for the hot dip galva-nized plate is applied to prevent the surface oxidation during the pro-cess time. 热镀锌板表面钝化(铬酸盐钝化),主要是为了防止在使用过程中其表面被氧化。
- High structure strengh,hot dip galvanized,greatly protract time of use. 高强度管材、产品经热镀锌处理、大大地延长了使用寿命；
- Commodity:Hot dipped galvanized steel in coil . 货物名称:冷轧热镀锌卷。
- The stable potential in the dip plating process assumed a positive shift with decreasing FeCl_3 content, which was beneficial to the refining of the crystalline, and the FeCl_3 content was suggested to be within 0.4~0.8 g/L. 结果表明:随FeCl3含量降低,浸锌过程稳定电位正移,有利于结晶细化,其较好含量范围为0·4~0·8g/L;
- The cold rolled coils entered into hot dip galvanizing workshop are put on waiting position and then transferred to uncoiler by coil car. 冷轧卷进入热镀锌车间后置于待处理位置,然后通过上卷小车送至开卷机。
- The effects of aluminum bath temperature, immersion time and silicon content on hot dip aluminum for HT200 are studied. 研究了热浸温度、时间及硅含量对HT200热浸渗铝的影响。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- Effects of cooling rate on eutectic microstructure of Zn-(0.24Ni) alloy for hot dip galvanization were investigated. 研究了冷却速度对用于热浸镀Zn的Zn0.;24Ni合金共晶组织的影响。
