您要查找的是不是：
- hot working face 高温工作面
- It was hard, hot work getting through the jungle. 通过密林既难又炎热。
- Obtain hot work permit prior to commencing work. 开工前必须申请动火许可证。
- Hot work will be permitted only if the LEL is <10%. 只有读数小于10%25的爆炸极限，才能进行动火作业操作。
- This enabled them to run transport cars right up to the work face. 这使他们能把运煤车一直开到工作面。
- Stripper face must extend 1/8” below working face of punch. 脱料板下表面至少比冲子工作面高出1/8”。
- Get a Work Permit before you can start the hot work. 办理作业许可证才能进行动火作业。
- All coal was moved from the work face by electrically-driven conveyors. 所有的煤都用电动传送带从工作面运出来。
- The navigation deck is not plain, we will fair the deck by hot working. 驾驶甲板不平,我们要火工校正。
- A hot work permit must be obtained to enter a process unit with a vehicle. 驾驶车辆进入工艺单元时应另外再办理一份工作准证。
- It was hot work, so after an hour we plunked ourselves down in a shade. 这是高温作业,所以一小时后我们找了一块阴凉地一屁股坐下去了。
- Its range had the larger outstand to outboard working face under the condition of injecting grouts in separate layers. 离层带注浆时的覆岩破坏形态和范围向工作面外侧突出较大。
- Accumulated water of 12206 working face having been dug completely is menacing mining of 12208 working face. 12206工作面采空区积水对12208工作面的采掘生产构成一定威胁。
- The experience of water danger reclamation in synclinal axis illustrating at T312 working face is introduced. 介绍了T312工作面向斜轴部水患治理的经验。
- With its very good mechanical and technological properties, it beans well both cold and hot working pressure. 有足够的机械性能和工艺性能,能极好的承受冷热加工。
- The join way of scraper coveyor cable pan using in mechanize working face is designed into fixtureless join way. 将机械化采煤工作面刮板输送机电缆槽之间的联接,设计成无紧固件的联接方式。
- In order to prolong hot working dies' working-time, we can fix them by hardfacing. 为了延长其使用寿命，人们采用堆焊的方法来修复或制造模具。
- The water-inrush from floor inundates Working face 51101W in Liangzhuang coal mine,Xinwen Mining Group. 新汶矿业集团良庄煤矿51101W工作面因底板突水导致工作面被淹。
- Introduce a pressure characteristic of working face with the usage of hydraulic breaking-off prop. 介绍切顶支柱使用情况下的工作面矿压特性,分析切顶支柱对顶板管理的作用。
- Because the surface of pipe is oxidised, it will not weld up during hot working, and so a considerable portion of the ingot would have to be scrapped. 因为缩孔表面已氧化，在进行热加工时也不会愈合，因而钢锭很大一部分要被废弃。
