您要查找的是不是：
- It was hard, hot work getting through the jungle. 通过密林既难又炎热。
- Obtain hot work permit prior to commencing work. 开工前必须申请动火许可证。
- Hot work will be permitted only if the LEL is <10%. 只有读数小于10%25的爆炸极限，才能进行动火作业操作。
- Get a Work Permit before you can start the hot work. 办理作业许可证才能进行动火作业。
- A hot work permit must be obtained to enter a process unit with a vehicle. 驾驶车辆进入工艺单元时应另外再办理一份工作准证。
- It was hot work, so after an hour we plunked ourselves down in a shade. 这是高温作业,所以一小时后我们找了一块阴凉地一屁股坐下去了。
- Adequate air supply must be provided as hot work will deplete oxygen content in the confine space. 应确保提供足够的空气，因为动火工作会消耗封闭空间的氧气。
- Hot work will not be permitted if readings >10% of the LEL or >23.5% oxygen are detected. 若可燃性气体含量达到了爆炸极限的10%25以上，（或者氧含量大于23.;5%25）， 则不得进行操作。
- The firewatcher should remain in the area for at least thirty (30) minutes after completion of the hot work. 监护人在动火结束后至少还要在场30分钟。
- Reminding : the form of Hot Work Permit should be filled and get authorize of HSE manager and kindling from the company-guard . 提示：此操作前需填写{热态作业许可证}，得有关部门认可，于门房取火种。
- The navigation deck is not plain, we will fair the deck by hot working. 驾驶甲板不平,我们要火工校正。
- In areas where hot work is not already precluded by Location Regulations, notices may also be required to stop hot work and smoking. 在尚未规定为杜绝动火作业的区域里，则需要设置停止动火作业和吸烟的通知。
- Do not carry out any hot work such as cutting, grinding, welding or soldering on a hydrogen installation. When hot work is necessary obtain a Work Permit. 在氢气设备周围不要进行任何动火作业,例如,切割、磨砂、焊接。动火作业必须取得工作许可证。
- The fatigue lives of in-phase thermo-mechanical fatigue (TMF) and isothermal fatigue (IF) were carried out in cast hot work die steel in stress control in this paper. 研究了热作模具钢在应力控制下的等温疲劳和同相热机械疲劳寿命,发现在相同的应力幅下,同相热机械疲劳寿命低于上限温度的等温疲劳寿命。
- A bowl of hot chicken soup is good for you. 喝一碗热鸡汤对你有好处。
- The hot weather has soured the milk. 炎热的天气使牛奶变酸了。
- Fuel oil transferring, sludge removal, cleaning, ventilating and gas free of the relevant fuel tanks are required before hot work for repair on the above-mentioned items Nos.4 &5. 为上述第4和5项进行热工修理前与其有关的燃油舱内的燃油、油渣需要驳出、舱需要清洁、通风和测爆。
- The relationship between high-temperature ductility,intragranular strength and dynam-ic precipitation of carbide of hot work tool steel during thermal deformation is investigated. 研究了碳化物在热变形过程中的动态析出量与钢的高温塑性、晶内强度的定量关系。
- Gas oil or kerosene may be used for the test provided that adequate arrangements are made for the retention of spills and control of hot work in the area. 只要对溢流保持和测试区域中动火作业的控制作了充分安排，便可在测试中采用瓦斯油或煤油。
- With its very good mechanical and technological properties, it beans well both cold and hot working pressure. 有足够的机械性能和工艺性能,能极好的承受冷热加工。
