您要查找的是不是：
- high creep strength steel 高蠕变强度钢
- FUNCTIONS OF MC IN LOW ALLOY CREEP STRENGTH STEEL CONTAINING BORON MC相在含硼多元低合金热强钢中的强化功能
- Determining the admissible stress of high temperature vessels, high temperature lasting and creep strength must be considered. 高温容器许用应力的确定，须考虑高温持久强度或蠕变强度许用应力。
- Taking the LGP spherical tank of high strength steel as an ohject. 球形储罐由于不断发生球罐开裂,泄漏事故,影响了球罐发展。
- Sand-blasting nozzles, drawing nibs for high strength steel wire, lathe cutting tools, saw tips. 适合于喷沙嘴、适合高强钢绞线的拔丝夹头、车刀、锯齿。
- The gear reducer for high strength steel carburizing, carburizing hardening, low noise transmission. 减速器的轮为高强度渗碳钢,经渗碳淬火处理,传动噪音低。
- The results show that DD3 alloy exhibits good creep strength and great creep life. 结果表明，DD3合金表现出良好的蠕变强度和较高的蠕变寿命；
- The creep strength of stabilized stainless steels is superior to that of unstabilized steels. 经稳定化处理的不锈钢的蠕变强度比未经稳定化处理的不锈钢的蠕变强度高。
- Development progress of high strength steel sheet and its application in automobile industry are introduced. 介绍了高强度钢板的开发进程和在汽车工业中的应用情况。
- The anisotropy of compression creep strength in a nickel-base single crystal superalloy was investigated. 研究了镍基单晶高温合金压缩蠕变强度的各向异性。
- Under the same condition,616 high strength steel is welded by double wire MIG and single wire MIG welding technology. 采用双丝MIG、单丝MIG焊接工艺在相同条件下对616高强钢进行了焊接。
- High strength baked-hardening (BH) steel is a kind of high strength steel for auto-panel. 摘要高强度烘烤强化(BH)钢是汽车覆盖件用的高强度钢板。
- The technology of low hydrogen embrittlement Zn-Ni alloy electroplating on aeronautic high strength steel was studied. 对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
- The proper processing, which is difficult, can assure the final acceptable proportion microstructure (Fig. 1) and the expected high-temperature creep strength. 正确的工艺过程（是很难实现的），可以保证最后能被接受的均衡微观结构和所期待的高温蠕变强度。
- Composite stainless steel tube fiber unit, High strength steel wire armored inside.Hermetically metallic sealed, HDPE sheath. 复合不锈钢管光纤单元,高强度钢丝内铠,金属管密封,高密度聚乙烯护套。
- The effect of inhibitor on hydrogen embrittlement of high strength steel has been studied by potentiodynamic polarization technique. 用电化学动电位极化的方法研究了缓蚀剂对高强度钢环境氢脆性能的影响。
- High strength steel piston rod has a ground, polished and hard chrome plated surface providing maximum life of bushing and seals. 高强度钢活塞杆有一个理由，抛光和表面镀硬铬套管提供最大的生活和海豹。
- The electrodeposition of a metallic coating on to high strength steel introduces the possibility that the steel fail by hydrogen embrittlement. 本文在几种典型溶液配方的基础上，采用250毫升的霍尔槽实验，阳极为纯锌板，通过小槽电镀实验以及镀液性能、镀层性能测试，最后分析对比确定出最佳溶液成分及工艺条件。
- This article discussed the effect of stress relief temperature to the weld microstructures and properties of high strength steel WEL TEN610CF. 对大型球罐用610CF钢焊后去应力退火温度对焊接组织与性能的影响进行了试验。
- For the micro-alloyed high strength steel alloy of oil and gas pipeline, repairing of the unqualified welds is one of the main working procedures. 摘要对于微合金高强度钢油气输送管线，不合格焊缝的返修是主要工序之一。
