您要查找的是不是：
- Radiographic examination of aluminium and magnesium alloy castings. 铝及镁合金铸件的射线照相检验。
- aluminium magnesium alloy 铝镁合金
- The powder metallurgy of high aluminium zinc alloy and its tribological characteristics have been studied. 初步研究了高铝锌基合金的粉末冶金工艺及其材料的摩擦磨损性能。
- Deposition ZL301 on ZM5 magnesium alloy surface by high energy micro arc process was performed. 使用高能微弧火花沉积机在ZM5镁合金表面上沉积ZL301合金。
- The nickel plating deposited on the conversion coating has high microhardness, which can provide good protection for the magnesium alloy. 转化膜上沉积的镀镍层具有较高的显微硬度，可以对镁合金基体起到良好的防护作用。
- The superplastic extrusion of MB26 magnesium alloy is also studied. 另外还对该合金的超塑性挤压作了实验研究。
- Our main products: Sucralose, Metallic Stearates, Magnesium trisilicate, Magnesium silicate, Calcium acetylacetonate, Synthetic Aluminium Magnesium Carbonate Hydroxide etc. 公司主要产品有三氯蔗糖、硬脂酸盐、三硅酸镁、硅酸镁、乙酰丙酮钙、合成碱式碳酸铝镁等。
- Thixomolding, the only Semi-Solid Forming(SSF)method for magnesium alloy on industrial scale, is suited to manufacture products with complicated figure and high density. 触变注射成型是目前唯一用于镁合金工业化生产的半固态成形技术,适合形状复杂、致密度高的零部件的生产。
- hot zincification alloy with high aluminium 高铝热镀锌合金
- Magnesium Alloy Sacrificial Anode is fit for media as soil and fresh water. 镁合金牺牲阳极适用于土壤,淡水介质中。
- It can product ten thousand tons of magnesium alloy castings every year. 年产万吨镁合金铸件。
- Direct electroless nickel plating is a method for plating on magnesium alloy. 摘要镁合金直接化学镀镍是其表面处理的一种方法。
- The use of magnesium alloy as a new material has been increasing significantly. 镁合金作为一种新型材料,正得到日益广泛的应用。
- It is made of high aluminium content grog,magnesite and graphite with a little additives , shaped at high pressure and then through heat treatment at low temperature. 主要原料为高铝熟料、镁砂、石墨或少量添加物，采用高压成型，低温热处理制得。
- Compositions of non-chromate dacromet bath of magnesium alloy are presented. 提出了适合镁合金的达克罗溶液配方构思。
- FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS FOR ORDERING AND SUPPLYING. PART 3: GRAVITY, LOW PRESSURE AND VACUUM CASTINGS OF ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS. 铸件。订货和供应的一般技术条件。第3部分:通过重量压力和负压的铝合金及镁合金的铸件。
- Development of heat-resistant magnesium alloys is reviewed. 摘要论述了耐热镁合金的研究现状。
- aluminium magnesium hydrocarbonate 碱式碳酸镁铝<抗酸药>
- As the lightest constructional material, magnesium alloy has high specific strength, high specific stiffness, good magnetic-shielding ability, good damping ability, and good machinability. 镁合金是目前比重最轻的结构材料，具有高的比强度、比刚度和良好的磁屏蔽性、阻尼性、切削加工性等优点。
- The frame of the chair uses high aluminium tube, textiline fabric. It is unfading, durable, tearing -resistant, mildew-resistant, bearing high and low temperature. It is easy to move and clean. 由优质铝管，特斯林布精心制作而成。具有不易褪色，耐磨损，耐撕裂，防霉变，耐高温和低温等特点，并且方便搬动和清洗
