您要查找的是不是：
- Low Pressure Valve Options and Accessories Misc. 低压阀门备选件和附件。
- Remove the body bolts from the valve body. 从阀体上拆卸阀体螺栓。
- Lift retainer and check assembly from valve body. 从阀体内取出护圈和止回阀总成。
- Screw the cover onto the valve body. 将阀盖旋在阀体上。
- Turn handle to be perfectly perpendicular to valve body. 将手柄旋转到与阀体完全垂直的位置。
- A booster relay controls a pinch valve by supplying air pressure to the valve body. 升压继电器通过控制输送到阀体的气量来实现对夹管阀的控制。
- High pressure gas valve, medical valve, scuba appliance valve, solenoid valve body, assorts of valve body or special valve body. 高压气体用阀、医疗用阀、潜水器材用阀、电磁阀体、各种阀体或特殊阀体。
- Remove the body bolts from valve body using Allen Key. 采用内六角扳手从阀体上拆卸阀体螺栓。
- Installation suggestion: valve body vertical and upward. 建议安装方式，阀体垂直向上。
- IMPORTANT! Flow must always be in direction of arrow on valve body. 重要提示！水流流向必须与阀体上的箭头方向一致。
- Insert valve body through mounting hole and seat lugs. 将阀体插入安装孔和密封连接盘。
- Press stem/ball into valve body and remove from open end. 将阀杆/球体压入阀体内，并且从开口端卸下来。
- The top of retainer must drop just below threads in the valve body. 护圈上方必须放置在阀门阀体螺纹以下。
- If the pressure builds up excessively, the pressure valve opens to relieve the pressure. 如果油箱内压力过高，则压力阀开启，以降低压力。
- Introducing the optimal structure mode of The twostep pressure valve,its veracity and its stability are best of all. 介绍了新型先导压力阀的结构特点,该阀准确性和稳定性好。
- Slide one half of the splash guard into the groove on the relief valve body. 将防溅保护的一半滑动到安全阀阀体的沟槽上。
- Several different types of valves are in use. Some are back pressure valves. 有几种不同的阀在使用中,有些是反向压力阀。
- Be sure to close test cock before pressurizing valve. 在重新对阀门加压之前，请确认关闭测试旋塞阀。
- Metal gravity and low pressure casting, sand gravity and low pressure casting, high pressure switch eclectric casting; cylinder cap, intake manifold, control valve body and so on. 金属型重力、低压铸件,砂型重力、低压铸件,高压电器铸件;气缸盖、进气岐管、调节阀阀体等。
- Electro-vacuum Differential Pressure Valve DYC-JQ electro-vacuum differential Pressure valve is a safely valve for mechanical vacuum pump. 是机械真空泵安全阀，安装于机械真空泵的进气口，并与泵同步开启和关闭。
