您要查找的是不是：
- Aliquation and inspiration tend to occur during the production of heat resistant aluminium alloys due to manufacturing and environmental factors. 在耐热铝合金制备过程中,由于工艺以及环境因素,很容易产生偏析和吸气。
- Is the coffeepot heat resistant or not? 咖啡壶是不是耐热产品?
- A heat resistant vinyl ester resin was studied. 研究了一种耐高温乙烯基酯树脂。
- Scandium-modified Al alloys are a new kind of high performance alloys. 钪改性的铝合金是一类高性能新型铝合金。
- To make this machine, we need some heat resistant steel plates. 我们需要一些耐高温钢板来生产这种机器。
- Heat resistant and extreme hardness Micro-crystal plate. 高硬度微晶板,耐高温;
- A mixed sulfuric acid boric acid solution was used to prepare the anodized oxide film for Al alloys. 摘要采用硫酸-硼酸混合液制备铝合金氧化膜。
- For many years, it has also provided parts and parcels such as venturi tube, flanges and fittings for Yantai Manoir Heat Resistant Alloys Co., Ltd. to manufacture furnaces which are then exported. 数年来，也为烟台玛努尔高温合金有限公司出口国外炉管提供了大批文丘里管、法兰、管件等炉管重要附件。
- It is built from the toughest heat resistant materials. 它是用最坚韧的耐热材料建造的。
- The influence of Sc on the performance of Al alloys is briefly described.The history and current status of the development of AlSc alloys are reviewed. 概述了钪对铝合金性能的影响,并对铝钪合金发展的历史和现状进行了概括。
- It's a heat resistant silicone coating with inert pigment. 一种添加惰性颜料的硅酮耐热涂料。
- They are manufactured from standard alloys, boron alloyed steel, heat resistant and corrosion resistant steel, and aluminium. 我们可以用标准合金、硼合金钢、抗热和抗腐蚀钢，以及铝合金来制造他们。
- The ballistic performance has been improved to reach the index demand by the adjustments of 7A52 Al alloy composition and heat treatment. 通过对7A52铝合金成分与热处理工艺设计调整,提高了抗弹性能,达到了防弹衣指标要求,并投入了小批量生产,现已装备应
- Classes of Heat Resistance and Pressure Resistance. 耐热性、耐压性的种类。
- Excellent solderability and heat resistance. (良好的焊锡性及耐热性。
- T2 Cu/2A50 Al alloy was bonded by blacksmith diffusion welding technology. 采用锻接扩散焊法进行了T2铜/2A50铝合金异种材料的焊接。
- The aluminum models the multiple-unit tube the heat resistant scope -40 -95. 铝塑复合管的耐温范围-40-95。
- The cycle behavior and the substructure change in bridge-using Al alloy at two heat treatments were studied tinder strain contolled low-cycle fatiguing. 在应变幅控制下，研究了桥用铝合金在两种热处理工艺下的循环特性及其微观结构的变化。
- Suitable for a wide range of low and high alloy steels, titanium alloys, austenitic stainless steels, heat resistant alloys, fibre glass reinforced plastics etc. 适合于低合金钢、高合金钢、钛合金、奥氏体不锈钢、耐热合金、玻璃纤维强化塑料等。
- Scandium in these alloys exhibits obvious grain refining,improved strength and serves to inhibit recrystallization in Al alloys,strengthen welds and eliminate hot cracking from welds. 钪对铝合金有明显的晶粒细化作用,提高了铝合金强度,抑制了再结晶,强化了焊缝,消除了焊缝出现的热裂。
