您要查找的是不是：
- heat resistance of fouling 污垢热阻
- The heat resistance of rosin was improved by HBS lignin modification. 松香的热稳定性通过高沸醇木质素的改性得到改善。
- The proper resin is figured out by comparing the heat resistance of different organosilane resins. 通过比较不同种类的有机硅树脂的耐热性能,筛选出合适的有机硅树脂。
- Noryl-PPO-PX1278 Primarily EXTRUSION material. Automotive. Passes FMVSS 302. Heat resistance of 130 C (266 F). 鸿跃工程塑胶原料，并提供相关资料!欢迎来电洽谈!
- With increase of sodium borate in the complexes the heat resistance of the complexes increases significantly. 固化过程中有小分子放出使配合物快速失重；配合物的耐热性能随着硼酸钠用量的增加而增强。
- Perhaps the amount and the existing time of HSP have a certain relation to the heat resistance of chrysanthemum. smHSP种类的多少和持续的时间可能与菊花的耐热性存在一定的关系。
- Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature. 皮革和鞋靴材料用胶粘剂。持久胶粘剂。升高温度下粘结剂的耐热试验。
- A co-cure method of novolac epoxy resin(F-51)and diallyl isophthalate(DAIP) were used to enhance the heat resistance of epoxy resins. 采用共固化的方法,得到酚醛环氧树脂(F-51)和间苯二甲酸二烯丙基酯(DAIP)的共固化树脂。
- Subsequently, the introduction of 30% rigid acrylic ester polymer into above system can further improve heat resistance of ABS/glass fiber/SMA. 再进一步引入适量的刚性丙烯酸酯类聚合物 ,使 ABS/玻纤 / SMA体系的耐热性又有所提高。
- The property effect on mechanical and heat resistance of BMI cast resin -when mixed -with carboxyl butjronitrile is introduced. 本文介绍端羧基丁腈橡胶的添加对BMI树脂浇铸体力学性能和热性能影响的实验工作。
- She found no signs of foul play. 她没发现谋杀迹象。
- The POXDN were characterized by IR and EPV. Scale resistance, physical mechanical properties and heat resistance of the POXDN coating are examined. 以IR和EPV方法对合成的POXDN进行了表征。
- Full of foul or impure matter;fecal. 污秽的充满臭的或不净的东西；糟粕的
- The heat resistance of the two organic silicone resin was investigated by derivative thermo-gravimetic analysis(DTG) and thermo-de... 并进行了红外光谱和差热分析。
- Full of foul or impure matter; fecal. 污秽的充满臭的或不净的东西；糟粕的
- There is ample evidence of foul play. 有充足的证据证明这次选举并不公正。
- The result showed that PABMI made the heat resistance of thermosets increased obviously With the content of epoxy resin in... 结果表明,PABMI使环氧树脂耐热性明显提高,随着环氧树脂比例增加,固化加快,粘结性增大,耐热性降低,建议了不同耐热等级时的原料比例。
- Everything is so intense and it fulls of foul air. 一切都这样紧张。空气是这样龌龊。
- The influence of curatives,reinforcing fillers and anti-heat agent on the heat resistance of MVQ vulcanizate was investigated. 探讨了硫化剂、补强剂和耐热添加剂对甲基乙烯基硅橡胶(MVQ)硫化胶耐热性能的影响。
- The solubility of PPTA copolymer was improved obviously with third monomer adding, but heat resistance of polymer was influenced. 选用含有醚键和甲烷基结构的第三单体,制备了不同第三单体配比的PPTA共聚物并制备出纤维。
