您要查找的是不是：
- Use core flow experiments, study the indexes include: block agent injectivity in different permeability formation, the intension after gel forming, shut off rate. 采用单岩心物模实验，考察了堵剂在不同渗透率地层中的注入性，成胶后的强度、封堵率、封堵保持率等封堵行为指标。
- Recently, in tissue engineering injectable, in situ gel forming systems which reduce invasion of implantation to host tissues to the full extent have been reported. 组织工程采用可注射原位形成水凝胶,与预成型支架相比具有特定的优势:能填充任意形状的缺损,并在很大程度上降低植入对机体组织的侵入性,且能与各种治疗药物混合。
- The better glass forming ability of GeS_2-Ga_2S_3-CdI_2 system was found compared to that of GeS_2-Ga_2S_3-PbI_2. 两个体系都是在富GeS_2区域形成玻璃，GeS_2-Ga_2S_3-CdI_2玻璃要比GeS_2-Ga_2S_3- PbI_2玻璃更容易制备。
- Effects of Cu and Ni on glass forming ability and thermal stability of Fe-(Al,Ga)-(P,C,Si,B) alloys were investigated by XRD and DSC. 利用X射线衍射(XRD)和差热分析(DSC)方法研究了Cu和Ni元素对Fe-(Al,Ga)-(P,C,Si,B)系合金非晶形成能力及热稳定性的影响。
- To 1995, formed ability of masser production, treatment, sale. 到1995年,形成了较大规模的生产、加工、销售能力。
- METHODS Orthogonal design was used to observe the influence of preparation conditions such as dry extract content,dry extract grain size,gel forming matrix and cooling agents on the quality of LDP. 方法采用正交试验法,研究滴丸含膏量、干膏细粉粒度、基质、冷凝剂种类对滴丸质量的影响。
- To copolymerize NVF and acrylonitrile (AN) is a good idea that combines the amino of the NVF"s hydrolyzate with AN"s excellent fiber forming ability. 该螯合纤维一方面利用了聚乙烯胺的亲水、螯合性能，另一方面，则利用了疏水性的聚丙烯腈纤维骨架结构。
- The glass forming ability and the thermal stability were also investigated by differential scanning calorimetry(DSC)and X-Ray diffraction(XRD). 利用XRD和DSC等手段对该合金的形成能力及热稳定性进行了分析。
- One company selling hydrochloric acid for etching cement floors reckoned that, because it was in gel form and could legally be washed down the drain, the product was environmentally friendly. 一家销售蚀刻水泥地盐酸的公司以为盐酸为胶液产品,可以被合法地冲进下水道，因此是环保产品。
- The glass forming ability, the behavior of crystallization and mechanical properties of the Cu-Zr-based bulk metallic glasses have been investigated. 本论文以铜锆基大块非晶合金为研究对象,研究了其非晶形成能力、晶化行为和力学性能。
- This Paper carries on comparative analysis of gel form of the nonfishy soybean powder in different NSI value,and investigate specific property of the soybean powder in add to the food. 本文通过水溶大豆粉凝固性试验对比了几种不同NSI值大豆粉凝胶形成性，以考察不同工艺生产的大豆粉在食品中物理添加特性，证明了不同剂量高频处理工艺生产不同NSI值大豆粉凝胶形成性情况。
- The soluble fiber in the gel forms a wall between carbohydrates and the body, releasing them slowly into the body. 胶凝体里的可溶解纤维形成在碳水化合物和身体之间的一道屏障,使它们慢慢地进入身体。
- The influence of the ingot microstructure on the glass forming ability of ?Zr??60?Al??15?Ni??25?? alloy was investigated by differential scanning calorimetry (DSC). 通过差示扫描量热法(DSC)研究了母合金铸锭凝固组织对大块非晶形成合金Zr60Al15Ni25玻璃形成能力的影响.
- Heat curing makes the high water content of CSH gel formed in the initial hydration period transform to the low water content of CSH gel. 热养护能促使水化初期生成的高含水率的CSH向低含水率的CSH变化；
- Made with the most concentrated amount fresh Aloe Vera leaves on the market, this cooling gel forms a protective barrier that helps retain moisture and promote healing. 用被集中的数额新鲜的芦荟维拉叶子做在市场,这个冷却的胶凝体形成帮助保留湿气和促进愈合的一个防护障碍。
- Berserk: Also reduces the rage cost of all your Bear Form abilities by 50%. 变形不再消耗魔法值，但是将获得一个3秒的冷却时间。
- Effects of composition and cooling rate on the forming ability and thermal stability of quasi-crystalline phases in Al_(100-x) Mn_x(x=12.5,13.55,15.7,17.75,20.6 and 22.3 at%)lloys ave beeninvestigated by using DTA and X-ray diffraction analysis. 本文通过DTA和X射线衍射分析;研究了合金成分和冷凝速率对Al_(100-x)Mn_x(x=12.;5;13
- The compounded gum was combined with bletilla hyacinthine gum and PVA in the proportion of 5:1 so that its adhesive ability and membrane forming ability were suitable for giving medicine through airway. 白芨胶与 PVA按体积比 5 :1配制的胶体具有适宜气道内要求的粘附性和成膜性。
- However in the process of multi-point forming, dimple and wrinkle are themain defects which influence the forming ability and quality of the parts andlimit the development of the multi-point forming technology. 这些缺陷影响工件的外观和内在质量，从而制约多点成形技术的实用化和进一步推广应用。
- Weng Rui,Wei Li.The effect of shear rate and shear time on jelling behavior of weak gel formed with solution of low polymer concentration[J].Petroleum Exploration and Development,1998,25(5):65-67. [7]翁蕊;韦莉.;剪切对低浓度聚合物冻胶成胶行为的影响[J]
