您要查找的是不是：
- fuel element hanger rod 燃料元件悬挂棒
- It demonstrates that the fuel element is still safe under this level of burnup. 在该燃耗下,元件仍具有一定的安全裕度。
- For the features of force on the full steel heterotypical arch bridge,an easy and appropriate method is proposed for installation of the hanger rod by jacking the tie beam. 针对全钢异型拱桥的受力特点,提出一种简单适用的顶系梁安装吊杆的施工方法。
- This paper discribles the fabrication technology by semi/fullCIP for HTGR spherical fuel element. 本文介绍了高温气冷堆(HTGR)球形燃料元件的半/全冷等静压制造工艺。
- The coated fuel particle is the key fuel element in the high temperature gas cooled reactor (HTGR). 包覆燃料颗粒是高温气冷堆燃料元件的关键组成部分。
- Design and Application of Reactor Core with Tight-Lattice Rod Type Fuel Element 稠密栅棒型燃料元件堆芯设计及应用
- Natural flake graphite of laminated structure is aeolotropic, and it is difficult to press spherical fuel element because of low bulk density and tap density of graphite micro-powder. 天然鳞片石墨为层状结构呈各向异性,且天然鳞片石墨微粉的松装密度和振实密度太低,不利于球形燃料元件的压制。
- Calculation Program for Strength of Pin for Hanger Rod of Drum 锅炉锅筒吊杆销轴强度校核计算程序
- SiC coatings were fabricated by chemical vapor reaction (CVR) on HTR fuel element matrix graphite, and the structure characteristics of SiC coatings were analyzed with XRD, Raman spectra and SEM. 本文对利用化学气相反应法(CVR)在高温气冷堆燃料元件基体石墨上制备SiC涂层的工艺进行了探讨,利用XRD、Raman谱及SEM对制备的SiC涂层进行了分析。
- In order to carry out power transient tests for PWR fuel element in China Advanced Research Reactor (CARR), the research and conceptual design of 3He pressure control loop were completed. 摘要为使中国先进研究堆(CARR)具备开展压水堆燃料瞬态试验的能力，本工作对氦-3回路进行研究与初步设计。
- Analysis and Solvent of the Problem of Hanger Rod of Drum Dimension Exceeds 锅筒吊杆尺寸超差问题分析及解决方法
- This paper analyses the reprocessing method and direct final disposal method of HTR spent fuel elements on basis of the characterization of HTR fuel element. 根据高温气冷堆乏燃料元件的特点，分析了对乏燃料元件进行后处理和直接最终处置的处理办法。
- At thc same timc,the internal force of the hanger rods determined by these methods shall be compared to select a reasonable method for the reference of the spreading and application o... 然而近年来，随着预应力技术的迅速发展和悬臂浇注、转体施工、劲性骨架及钢管拱架等施工方法的采用，使拱桥的施工方法有了质的变化。
- The paper also gives results of transporting 32boxes of HFETR discharged fuel elements first loaded in the5MW LPR. 给出了5MW LPR 首炉装料的32盒 HFETR 卸料元件的运输实践结果。
- The irradiation and whole-core demonstration indicate that the fuel elements were dimensionally sta-ble. 辐照和全堆芯试用表明:元件外形尺寸稳定;
- Safe and economic disposal of HTR spent fuel elements is an important topic for HTR development. 用既安全又经济的办法处理高温气冷堆乏燃料元件是高温气冷堆发展的重要课题。
- Once irradiated, the uranium fuel elements tend to lose strength and become wrinkled. 经辐射，铀燃料的强度往往减弱并且会出现皱曲现象。
- Spent fuel elements in HTR-10 are discharged into seal and shield casks.Each cask can hold approximately 2 000 fuel elements. HTR-10乏燃料元件卸在密封和屏蔽的乏燃料罐内，每罐可容纳2 000个乏燃料元件。
- Design of Change of Hanger Rods of Tied Arch Bridge 系杆拱桥吊杆更换设计
- A chain reaction can be initiated by inserting more and more fuel elements into the reactor core until the critical mass is attained. 只要在反应堆中加入越来越多的燃料并且一直加到临界质量为止，就可以发生连锁反应。
