您要查找的是不是：
- Instantaneous investigation of gas-solid two-phase free jet flow 气固两相自由射流的瞬态流场研究
- Numerical Simulation of Gas-Particle Phase Free Jet Flow Combustion 气固两相自由射流燃烧的数值模拟
- free jet flow 自由射流
- The influence of density ratio on the characteristic frequency of coherent structure on the centreline of low Re number free round jet flow has been investigated with Dual PDA. 采用激光粒子动态分析仪研究了低雷诺数时密度比对自由圆射流近喷嘴区轴线相干结构特征频率的影响。
- The jet flow radiation computational method of axis-symmetry nozzle and rectangle nozzle are also discussed. 研究了轴对称喷管和二元矩形喷管喷气流辐射的计算方法。
- Based on sandblast working principle and structure characters of blast gun, free jet model was developed in eject sect. 根据喷砂工作原理和喷枪结构特征建立了引射段的自由射流模型。
- In there it forms an aerated cavity between the step surface and the free jet to improve aerification. 通过数值模拟得到的墩后水翅、阶梯面挑射水舌和掺气腔体等,与实验观测到的现象吻合。
- There are two flow forms in the stepped spillways , which are skimming flow and jet flow. 1：研究表明台阶式溢洪道的水流流态可以分为跌落流和滑行流两种流态。
- A polyphase flow numerical analog analysis has been made of the high pressure jet flow field, by way of CFD. 利用计算流体动力学(FD)方法对高压水射流流场进行了多相流的数值模拟分析。
- The MHD effect on liquid metal free surface jet flows under magnetic field has been investigated. 摘要分析了磁流体力学效应对液态金属自由表面射流稳定性的影响。
- A polyphase flow numerical analog analysis has been made of the high pressure jet flow field,by way of CFD. 利用计算流体动力学(CFD)的方法对高压水射流流场进行了多相流的数值模拟分析。
- Based on sandblast working principle and structural characters of blast gun, free jet model was developed in eject sect. 根据喷砂工作原理和喷枪结构特征建立了引射段的自由射流模型。
- The article calculates unsteady initial shock wave produced by jet flow in launcher. 文中对贮运发射箱内燃气射流产生的初始冲击波流场进行了非定常数值模拟。
- And the jet flow field of 4 nozzles of a PDC bit is tested by simulating the bottomhole flow field of the bit. 在模拟PDC钻头井底流场的条件下,对PDC钻头4个喷嘴的射流流场进行了测试。
- The nondimensional curve of speed individual maximum decrease along jet flow was obtained for the first time. 首次得出不同空燃比下速度分量的最大值沿射流长度衰减的无因次曲线。
- The high speed jet flow thus formed, guided by the rotating nozzel, scours repeatedly on the tank bottom at an angle of 3. 为防止原油储罐中沉淀物沉积,国外一些公司采用了皮托管射流器系统进行清渣除淤工作。
- The article calculates unsteady jet flow in concentric canister launcher with three different clearances between inner canister and outer canister. 文中针对三种不同内、外筒间隙的同心筒发射装置,对其发射过程中发射筒内的燃气射流流场进行了非定常数值模拟。
- The reasons were studied based on upstream and downstream height difference and jet flow elevation design, as well as energy dissipation mechanism. 从上下游堰顶高差、挑流平台高程设计及消能等方面,分析了结构物产生破坏的原因。
- The distributions of velocity, pressure, temperature, supersaturation and nucleation rate of supercritical solution in entrance of the nozzle, inside of the nozzle and the free jet were simulated... 模拟了超临界溶液在喷嘴入口段、喷嘴以及喷嘴后自由喷射段中的流速、压力、温度、过饱和度以及成核速率的分布。
- In this paper,fluid mechanics was applied to analyze the flow field of swirling jet flow and guide the twisting and untwisting of pneumatic splice. 用流体力学分析旋转射流的流场，来指导气流捻接的解捻与加捻。
