您要查找的是不是：
- Free cutting, very small broken chips and excellent surface finish. 自由切割,碎片细小,表面处理极佳。
- The hypoeutectoid graphitized free cutting steel was proposed. 具有亚共析组织的钢种其石墨化过程一直很难，因此该钢种开发的关键是促进其石墨化过程。
- For cutting non-ferrous brittle materials such as granite , marble , concrete , ect with powerful cutting ability. 适用于加工各种花岗岩、大理石、混凝土等非金属脆硬性材料的专业加工，切削能力强。
- BTA has good heat faster, cutting ability of the prominent characteristics of the water cutting better results. 具有排屑好、散热快、切割能力强的突出特点，加水切割效果更好。
- With increasing enlargement of roadheader's application, people put forward more request to its cutting ability. 随着掘进机使用范围的日益增大，对其截割能力的要求也不断提高。
- Rooting rate of SO4 and 5BB is40% and 48%, but Survival rate is 44% and 40%, both of cutting ability ismedium. 2. SO4和5BB的生根率为40%25和48%25，而成苗率为44%25和40%25，两者扦插繁殖能力中等。
- In this paper, development of these three kinds of free cutting steels for machine structure purpose is described. 概述了锡易切削钢、铋易切削钢、石墨易切削钢这3类机械结构用无铅易切削钢的发展情况。
- With superior cutting ability and durability of the highest electrician proud with cutters. 以超群的切断能力和耐用性而自豪的最高级的电工用钢丝钳。
- A new environmental friendly free cutting brass containing stibium instead of lead was produced by casting and rolling. 采用熔铸、轧制的方法生产出了以锑代铅的环保型无铅易切削黄铜板材。
- The microstructure and property of the free cutting unquenched plastic die steels have been studied. 研究了易切削系非调质塑料模具钢的组织与性能。
- The author uses the K3 RNT system (SybronEndo, Orange, CA, USA) for its flexibility, tactile “feel”, cutting ability and fracture resistance. 它们在帮助创建卓越的根管形态方面具有很高的价值，而且一旦创建完成，就可以提供理想的冲洗条件，从而对根管进行最大程度的清洁和消毒灭菌。
- Beta takes root to leadand the Survival rate respectively is 65% and 62%, the cutting ability isstronger than other rootstocks variety. 其中贝达生根率和成苗率分别为65%25和62%25，是南方扦插繁殖能力较强的砧木品种；
- The diamond mesh size in a cutting tool also directly relates to the number of crystals per carat and the free cutting capability of the diamond tool. 钻石网目尺寸的刀具也直接关系到每克拉的晶体数目免费钻石切割工具的能力。
- The cutting machine belongs to grinding wheel cutting mode, it brought crosswise and vertical cutting ability to full play by suitable means. 本文设计的自动金相试样切割机采用砂轮切割方法，选择了一种较合理的切割形式，最大限度的提高了切割机横向和纵向切割能力；
- During the smelting process of sulfur or lead series free cutting steel, atmospheric pollution is severe, and lead is harmful element to human. 摘要常用的硫系、铅系易切削钢，冶炼时空气污染严重，且铅有毒，对人体有害。
- The relationship between carbon content and properties and microstrure of free cutting non-heat-treated plasic seels was investigated in this paper. 研究了碳含量与易切削非调质塑料模具钢性能间的关系。
- Sn-free cutting steel, Bi-free cutting steel and graphite free cutting steel without harmful element to human and surroundings will be friendly development material. 锡易切削钢、铋易切削钢、石墨易切削钢由于不添加对人和环境有害的元素，是一种非常友好的开发钢种。
- R.Wenke, E.L.O.K.C.B.T.L.O.L., “Investigations on hard coated reamers in different lubricant free cutting operations”, Surface &Coatings Technology, vol.90, 1997, pp.172-177. 陈昱淇，“碳矽含量对沃斯回火无合金铁-碳-矽材料磨耗行为之研究”，2006年，义守大学材料科学与工程学系。
- By analyzing the mathematics cutting model of traditional MAF, it is found that increasing the cutting ability of the magnetic abrasive brush is the key to improve the efficiency of MAF. 通过分析传统磁粒研磨材料去除数学模型，揭示了提高磨刷切削能力是提高磁粒研磨效率的关键。
- The deformation characteristics of non free cutting (NFC) are experimentally studied with the chip cross section geometry, the deformation configuration and the cutting ratio. 通过对切屑截面几何、变形状态及切削比的实验分析，研究了非自由切削的变形特征。
