您要查找的是不是：
- Forced convection cooling system to easily reach the requirements of strict lead free soldering processes. 强制冷却系统实现急冷达到无铅焊接工艺的冷却降温要求。
- CPU Air Forced Convection Cooling System 空气强迫对流冷却系统
- Study of fin edge shape of plate fin heat sink in forced convection cooling 强制风冷板翅式散热器肋片边缘形状的研究
- Forced convection cooling of heat generating blocks simulating electronic components 模拟电子元件的发热部件的强迫对流冷却
- forced convection cooling 强制对流冷却
- The benchtop system delivers forced convection heat that can be controlled with multiple time, temperature and cooling zones. 在台式系统提供强迫对流换热，可控制多时间，温度和冷却区。
- There are two modes of convection: free convection and forced convection. 热对流的花样最多，且和流力有密切关系。
- Convection can be of two types: natural convection and forced convection. 对流可分为两类，即自然对流和强制对流。
- MHY one-phase turbulance forced convection is used in the coolant flow. 计算中边界条 件按一维处理，并采用经验公式计算。
- Droplet ignition and extinction in practical combustors are strongly influenced by forced convection and turbulence. 在实际燃烧室中，液滴点火和熄火受到强迫对流和紊流的强烈影响。
- Triggering and evolution of winter-time natural convection cooling effect in fractured-rock revetment embankments of the Qinghai-Tibet Railway are investigated by means of an air-flow function. 导出适用于变渗透率多孔介质的无量纲控制方程,并针对青藏铁路工程建设,分析了碎石护坡路堤冬季自然对流降温效应的产生和演化过程。
- Hence, forced convection plays a more important role in heat transfer of microscale flow boiling than nucleate boiling. 这是因为莫耳分率越小，对于甲醇/水混合系统，其前进接触角越大，使得气体较容易残留在人造孔穴中的缘故。
- The heat transfer capability of air forced convection decrease with the air pressure in cabin dropping. 舱内对流换热能力随气压下降不断衰减，气压越低，衰减越快。
- In forced convection the movement of the fluid or gas is caused by an external agent which gives rise to pressure differences. 在强制对流中，液体或气体的运动是产生压力差的某种外营力造成的。
- Study on Forced Air Convection Cooling for Electronic Assemblies 电子器件空气强制对流冷却研究
- A forced convection finned tube exchanger model with constant blast volume was constructed and its reliability was confirmed by the performance test. 摘要建立了恒流条件下的强制对流翅片管式换热器的结霜模型，并用实验结果验证了模型的可靠性。
- The optimized design is performed through CFD/NHT simulation for an avionics system adopting force convection air cooling,and also experiment is made to validate the simulation results. 针对采用强迫风冷散热的典型机载电子设备,利用CFD/NHT仿真进行优化设计,与热测试相结合进行验证。
- A study of the dryout characteristics in forced convection boiling in electrically heated horizontal helically coiled tube is reported. 在中低压条件下,对卧式放置螺旋管中汽-水两相流烧干特性进行了实验研究,探讨了螺旋管内烧干机理。
- The reactor performance and RCCS capability during normal operation and two loss of forced convection(LOFC) accidents are analyzed using THERMIX code. 本文用THERMIX程序计算了稳态和两类丧失强迫冷却事故瞬态的反应堆温度分布以及空腔冷却系统(RCCS)的载热能力。
- The results indicate the empirical relations can be used to analyze forced convection heat transfer of continuous flow in lower air pressure. 结果表明，低气压下，处于连续介质流的流体对流换热仍然可以利用常规情况经验准则关系式进行分析计算；
