您要查找的是不是：
- foot switch selector 脚踏拍子开关选择钮
- Set the main switch selector to A (auto). 把主选择开关调至A(自动)。
- Foot switch, convenient to produce quickly. 脚踏开关，便于快速生产。
- Set the main switch selector to the desired operation. 设置主选择开关在所需的操作状态。
- Set the main switch selector to A (auto) or M (manual). 把主选择开关转到A(自动)或M(手动)
- Automatic suction operation and foot switch control. 自动吸风运行与脚开关控制。
- Set the main switch selector to A and set the mode dial to normal mode. 把主选择开关设置在A（自动）,同时把模式盘设置在普通模式。
- Main switch selector: Sets the camera to L (lock: power is turned off), and A (Auto), or M (Manual) operation. 主开关选择器:设置相机在L(锁定:电源断开),A(自动)或M(手动)操作。
- When then main switch selector is set to A (auto) or M (manual), the film will resume rewinding. 当主选择开关调至A(自动)或M(手动)时,又会恢复倒片
- The main switch selector, mode dial, up\down buttons, and a brief explanation of their functions are shown below. 以下说明主选择开关、模式盘、向上\\向下按钮以及解释它们的功能。
- To prevent unnecessary battery depletion. Set the main switch selector to L (lock) when you are not using the camera. 为避免不必要的电池耗电,当您不用相机时,请把主选择开关设定到L（锁定）。
- Manual or auto operation is adjustable.It can be operated by foot switch oy by two-hand switch for safety. 手动或自动操作是可以调整的，为安全起见也可以使用脚踏开关或双手开关操作。
- The main switch selector, mode dial, updown buttons, and a brief explanation of their functions are shown below. 以下说明主选择开关、模式盘、向上向下按钮以及解释它们的功能。
- In case a wrong recognition is made, the command can be cancelled by simply pressing the foot switch. 万一发生识别错误，只要踩下脚踏开关，就可以使指令消除。
- To cancel AE lock before releasing the shutter, press the previewAE lock button again or set the main switch selector to L (lock) to turn off the power. 如要在快门释放前取消自动曝光锁定,请再次按压预景深自动曝光锁定按钮,或把主选择开光调到L,以断开电源。
- Control Record/Play/Stop functions remotely using any MIDI controllers such as a Foot Switch, Modulation wheel. 控制记录/播放/停止功能遥控使用任何MIDI控制器如足部开关，调制轮。
- The following modes will be canceled when the main switch selector is set to L (lock) AE lock setting (in the previewAE lock user setting mode). Self-timer mode. 当主选择开关设置在（锁定）,以下的模式将被取消。自动曝光锁定设置（在预景深自动曝光锁定设置模式）,自拍模式。
- Connect air tap with package-filled bag, evenly and flatly place it, （press foot switch) to finish the packa-ging. 将物料装填好的包装袋口套入气嘴，放置均匀平坦，即按启动开关（脚踏开关），包装完成。
- The operator simply puts a wire with shrinkable tube in the middle of the heater unit, then presses foot switch. 操作员将线束放入线束支架（支架未出现在产品图片中）。
