您要查找的是不是：
- The creep of three dimensional braiding composites were studied by creep experiments of specimens under different braiding structure,braiding angle,fiber volume content and loads. 对不同编织结构、不同编织角、不同纤维体积含量和不同应力水平下的三维编织复合材料试件进行了蠕变测试实验,研究了三维编织复合材料的蠕变性能。
- Test method for fiber volume content of carbon fiber reinforced plastics 碳纤维增强塑料纤维体积含量试验方法
- fiber volume content 纤维体积分数
- steel fiber volume content 钢纤维体积含量
- Interior measurement includes vertical and horizontal extension, tolerance, fiber volume percentage, content of formaldehyde, acidity and color fastness. 内在质量包括横向延伸值、纵向延伸值和染色牢度等项指标。
- The results showed that experimental values have a good agreement with calculated values at high PZT volume content. 文章对压电常数作了数学模拟，实验结果表明：在压电陶瓷（PZT）体积含量较高时，实验值与计算值比较吻合。
- The slurry apparent viscosity has exponent relation to the solid volume content. 矿浆表观粘度与固体体积含量呈指数关系。
- This is a BATF classification for an American lager with an alcohol by volume content of 5% to 7.5% by volume. 这款低温发酵啤酒的酒精度5%25-7.;5%25，在美国烟草管理局的分类是什么？
- Furthermore, the bond splitting tensile strength increases with addition of steel fiber volume fraction. 在一定范围内,随钢纤维体积率的增加,钢纤维混凝土与老混凝土粘结劈拉强度明显提高。
- The major problems involved in fabricating large, high fiber volume fraction components by RTM, are discussed. 阐述了RTM工艺应用于大尺寸,高纤维含量构件时存在的主要问题。
- The compressibility of fabric preforms,involved in the fiber volume fraction(Vf) in the compress process,was studied. 研究了预定型织物在压实阶段的可压缩性,涉及压缩过程中纤维体积含量的变化特点。
- This article uses multi-mineral model analysis (MMMA) method to calculate rock mineral composition and the volume content, establish the block layer lithologic volume profile. 本文采用多矿物模型分析(MMMA)方法，计算地层岩石矿物成分及体积含量，建立了工区地层岩性体积剖面。
- Liu Y H,Du J,Yu S R,at al.Effect of alumina fiber volume fraction on wear property of Al2O3f+Cf/ZL109 hybrid composites[J].Tribology,2003,23(1):18-22. [1]刘耀辉;杜军;于思荣;等.;氧化铝含量对Al2O3f+Cf/ZL109混杂复合材料耐磨性能的影响[J]
- This process can add mould pressure to the preforms through inflating the bladder.Thus,higher fiber volume fraction can be achieved. 该工艺通过向气囊内充压,对预成型体施加一定的成型压力,从而提高构件纤维体积含量及力学性能。
- The compressibility of fabric preforms, involved in the fiber volume fraction (V(subscript f)) in the compress process, was studied. 摘要研究了预定型织物在压实阶段的可压缩性，涉及压缩过程中纤维体积含量的变化特点。
- Liu Y H,Du J,Yu S R,et al.The effect of alumina fiber volume fraction on wear resistance of Al2O3f+Cf/ZL109 hybrid composites[J].Tribology,2003,23 (1):18-22. [2]刘耀辉;杜军;于思荣;等.;氧化铝纤维含量对Al2O3f+Cf/ZL109混杂复合材料耐磨性能的影响[J]
- In the paper, the influence of blending ratio on electrical signal produced by blended strands in the capacitive evenness tester is disscused when strand volume content in the condensor is very small. 根据纱条在电容传感器中的实际情况，提出了充满度很小时纤维和空气组成并联介质的分析方法，建立了电容与纱条混纺比之间的线性关系。
- A universal contour plot in the dipole polarizability vs. fiber volume fraction domain is constructed for the normalized effective conductivity of the composite. 由此，吾人可建构一普遍适用之有效导热度之等位线图于双极极化度对纤维体积分率之数域中。
- The fatigue performance of plain concrete and FRC is compared in order to investigate the influence of parameters such as fiber volume on fatigue behavior. 方法通过纤维体积率等不同参数比较了素混凝土和纤维混凝土的疲劳性能。
- composites fiber volume fraction 复合材料纤维体积含量
