您要查找的是不是：
- etching rate modeling 刻蚀速率模型
- The effects of composition of etchant, etching temperature and etching time on etching rate are also investigated. 通过研究刻蚀剂组份、刻蚀时间、刻蚀温度对刻蚀速率的影响,可提供合适的刻蚀剥层方案。
- The first passivation layer has a first etching rate with respect to an etching agent. 第一钝化层具有与蚀刻剂相关的第一蚀刻率。
- However, the relation between the etching rate and laser fluence appears nonlinearly. 在高雷射能量密度时则为一极平坦的连续表面。
- Anderson G W. A Burning Rate Model for Charring Materials[Z]. Gaitherburg:1997. 未定义类型作者.;题名(正体;实词首字母大写)[Z]
- During copper etching,the cuprous ion concentration in the etchant would increase which causes an etching rate reduction. 随着蚀铜过程的进行,蚀铜液中的一价铜离子浓度不断增加,造成蚀铜液的蚀铜能力下降。
- It is shown that the bulk etching rate as a function of etching temperature can be described by Arrhenius equation Vb=ae-E/KT. 研究结果表明;体蚀刻速度与蚀刻温度遵守Arr-henius方程V_b=a·e~(-E/KT);其中;体激活能E=0.;66±0。
- Then the excimer laser etching on polymethyl methacrylate (PMMA) plate mechanism is studied, with the etching rate curves listing by experiments. 研究了准分子激光对聚甲基丙烯酸甲脂(PMMA)基片的刻蚀机制，获得了刻蚀曲线。
- The relation between etching rate, sidewall roughness and RF power and Oxygen rate is deeply investigated by implementing careful research on RIE. 在RIE中，离子轰击的作用，会在波导侧壁形成起伏结构，增加了器件的散射损耗。
- More often, all of the materials exposed to the etchant have a finite etch rate. 通常，所有暴露在刻蚀剂中的材料都具有一定的刻蚀速率。
- The second passivation layer has a second etching rate that is higher than the first etching rate with respect to the etching agent. 第二钝化层具有与蚀刻剂相关且高于第一蚀刻率的第二蚀刻率。
- The water contact angle, etching rate and surface morphology analysis were used to characterize the cleaning effect after the plasma clean process. 藉由水滴角度、蚀刻速率、表面状态来研究电浆清洗的效应。
- Anderson G W. A Burning Rate Model for Charring Materials[Z]. Gaitherburg：1997. 未定义类型作者．题名（正体，实词首字母大写）[Z].;出版地:出版者;出版年
- In this paper, We study the point estimation of linear failure rate model under censored life test. 该文研究了在定数截尾样本下线性失效率模型中参数的点估计问题。
- The two most popular models are the probe gap model and the probe rate model. 其中两个非常受欢迎的模型分别是探查缺口模型和探查速率模型。
- Through comparing the indicators for estimating the process localization,a new concept of localized etching rate(LER) is presented for evaluating stray etching. 通过对定域性评价指标的比较,提出了以定域蚀除率评价杂散蚀除的新概念。
- Objective To establish a rate model of stable orthotopic liver transplantation using three-cuff technique. 目的探讨建立稳定的三袖套法大鼠原位肝移植模型。
- During the process of copper etching, the concentration of cuprous ion gradually builds up in the etchant, resulting in the reduction of copper etching rate. 随著蚀铜过程的进行，蚀铜液中的一价铜离子浓度不断增加，造成蚀铜液的蚀铜能力下降。
- Then we build RMB’s equilibrium exchange rate model by Engle-Granger two steps, error-correction model and H-P filter. 然后运用Engle-Granger两步法、误差修正模型和H-P滤波等计量方法构造出人民币均衡汇率模型，并以此估算出人民币均衡汇率的水平及其失调程度。
- Etch rate and selectivity are examined as a function of SF6, flow, O2 flow, CHF3 flow, pressure and the RF power in order to optimize etching condition. 为了优化刻蚀条件，将刻蚀速率和选择比表示为SF6、O2、CHF3各自的流最以及气压和射频功率的函数。
