您要查找的是不是：
- emulsion cutting fluids 傲乳化切削液
- micro emulsion cutting fluid 微乳切削液
- Research on Maintenance and Monitoring Technology for Emulsive Cutting Fluid 乳化切削液的维护与监控技术
- Active Sulfur in Cutting Fluids, Method of Test for (05. 切割液中活性硫的试验方法(05。
- It shows the superiority of OoW green cutting fluids. 介绍绿色切削液开发的基本要求。
- The result shows that the micro emulsive cutting fluid is a transparent yellow liquid; 结果表明:本实验所得微乳切削液为浅黄色透明液体;
- after adding the anti-rust water,the micro emulsive cutting fluid is accordant with the Chinese Standard and can meet the rustless require of 15 day hanging sheet experiment. 该切削液中加入自制防锈水后,各项性能不仅达到国标要求,而且满足挂片实验15天不生锈的要求;
- A kind of transparent micro emulsion as cutting fluid consisted of surfactant, lubricant, antirust additive, stabilizer, mineral oil with low viscosity, biocide and water, etc. was prepared. 研制出一种由表面活性剂、润滑剂、防锈剂、稳定剂、低粘度矿物油、杀菌剂和水等组成的透明微乳化水基切削液。
- YQ series of oil based cutting fluids were developed, and testified being in good quality at several mach... 在此基础上研制出的YQ系列油基切削液产品经生产试验证实效果十分明显。
- Dry machining technology is a fundamental solution to the environmental and economic problems caused by cutting fluids. 解决切削液带来的环境及经济效应的根本方法就是干切削加工技术。
- Cooled air, minimum botanic or ester oils and little water were used to form new cutting fluids of OoW (Oils on Water) by means of combined mist-jet. 摘要油膜水滴是使用冷空气、微量可自然降解油剂和少量水，经复合喷雾法形成可自然分解的、新型绿色切削液。
- Comparing with the traditional cutting fluids, OoW has more superiority in protecting environment, saving resources and so on. 与传统切削液相比，油膜水滴在保护环境，节省资源等方面有很大的优势。
- Cooled air,minimum botanic oils and little water were used to form new cutting fluids of oils on water(OoW) by means of combined mist-jet. 油膜水滴是使用冷空气、微量可自然降解油剂和少量水经复合喷雾法形成的可自然分解的新型绿色切削液。
- Comparing with the traditional cutting fluids,OoW has more superiority in protecting environment,saving resources and so on. 与传统切削液相比,油膜水滴在保护环境,节省资源等方面有很大的优势。
- The experimental results have further showed that OoW cutting fluids can cut down about 30% cutting forces and also have good lubricat... 试验结果表明,微量油膜附水滴切削液能使切削力减少30%25左右,且具有良好的润滑和冷却效果,适用于切削加工。
- Cooled air,minimum botanic or ester oils and little water were used to form new cutting fluids of OoW(Oils on Water)by means of combined mist-jet. 油膜水滴是使用冷空气、微量可自然降解油剂和少量水,经复合喷雾法形成可自然分解的、新型绿色切削液。
- The required ecological effect of MQL cutting fluids is indicated and some base oils and additives of ecological cutting fluids are presented in the paper. 简述了生态效应对MQL切削液的要求,给出了具有生态效应的几种切削液基油和添加剂,并对其生态性能和切削性能进行了比较。
- This nitrite-free and phenol-free cutting fluid is safe to use in high speed cutting operation. 该产品不含亚硝酸盐和苯酚，环保易处理。
- HONIC 400 is a low viscosity neat cutting fluid which is extensively used in honing applications. 雄力400搪磨油为低黏度切削油，广泛应用于搪磨作业。
- You can ask the photographer for some emulsion. 你可以找摄影师要点感光乳剂。
