您要查找的是不是：
- The wear performances of Ni-P-SiC electroless composite coating were studied by Taber tester and the wear morphology was observed by VHX-100 three-dimensional video microscope. The wear mechanism of composite coating was also analyzed. 采用Taber试验机对Ni-P-SiC复合镀层的磨损性能进行了测试,并用VHX-100型三维视频显微镜对磨损形貌进行了观察,分析了复合镀层的磨损机理。
- (Ni-P)-MoS2 electroless composite coating （Ni-P）-MoS2化学复合镀层
- Mechanism of electroless composite plating, functions of bath components, dispersion of nano particles, structure and properties of electroless composite coatings were described. 阐述了镍-磷-纳米颗粒化学复合镀的机理、镀液中各成分的作用、纳米颗粒的分散、纳米复合镀层的结构和性能。
- Ni-P-nano-TiO2 (anatase-type) electroless composite coating Ni-P-TiO2（锐钛型）纳米化学复合镀
- Keywords Nonmetal materials;Electroless composite coating;Nanoscale particle; 非金属材料;化学复合镀;纳米粒子;
- Ni-P-SiC electroless composite coatings Ni-P-SiC化学复合镀层
- electroless composite coatings Ni-P-nano-TiO2 (futile) 纳米化学复合镀Ni-P-TiO2（金红石型）
- electroless composite coating 化学复合镀
- Corrosion Resistance Investigation of Electroless Composite Coatings Consisted of Nickel-Phosphorus-Nanometer Zinc Salt 镍-磷-锌盐纳米复合化学镀层抗腐蚀性能的研究
- Electroless composite plating is one of new surface process techniques. 化学复合镀是一种新型表面处理技术。
- Under the same heating rate, the crystallization temperature of Ni P UFD composite coating is lower than that of Ni P coating, while the peak temperature of the two electroless coating are well matched. 在相同的加热速率下 ,Ni P UFD复合镀层晶化的起始温度均低于Ni P镀层 ,但峰值温度与Ni P镀层相当 ;
- electroless composite coatings 化学复合镀
- It is proved that electroless composite plating Ni P Si 3N 4 on piston ring is a new technology,which is worth application and dissemination. 结果表明：活塞环化学复合镀Ni－P－Si3N4是一种值得推广应用的新型工艺方法。
- The mecha-nism of electroless composite plating and the dispersion mechanism of surfactant in electroless composite plating were discussed. 对化学复合镀机理及表面活性剂在化学复合镀中的分散机理进行了探讨。
- The paper present the new developments of Ni-W coat, Ni-W-B coat, tungsten composite coat and tungsten brush coat etc. 介绍了镍钨镀层、镍钨硼(磷)镀层、含钨复合镀层和含钨电刷镀镀层等的研究与开发的近期进展。
- Composite coatings can be achieved by electrodeposition or electroless plating.Composite electroplating are also an important method for acquiring composite materials. 采用电沉积或化学镀可以获得复合镀层,复合电镀也是制备复合材料的一种重要方法。
- electroless nanometer composite coating 纳米复合材料镀层
- The results show that multiplayer Ni-Cr 2O 3 composite coating have a strong wear resistance. 结果表明 ,电刷镀多层Ni-Cr2 O3复合镀层具有良好的耐磨性。
- Based on this work, interlayer shielding composite coating gains more SE than 52dB between 3OMHz-I000MHz planewave. 在此基础上制备的层状复合屏蔽涂料获得了30MHz-1000MHz频段SE分贝值超过52dB的成果。
- Microstructure of the ceramal composite coating was characterized by SEM,XRD and EDS. 利用SEM、XRD和EDS等分析了涂层的显微组织和相组成;
