您要查找的是不是：
- effective aspect ratio parameter 有效伸长率, 有效展弦比参数
- effective aspect ratio 有效长度比
- The maximum texture aspect ratio. 最大纹理高宽比。
- The value for the pixel aspect ratio must be between 1 and 255. 像素纵横比值必须在 1 到 255 之间。
- Pixel aspect ratio value needs to be between 1 and 255. 像素纵横比需要在 1 到 255 之间。
- Gets the maximum texture aspect ratio supported by the hardware. 获取硬件支持的最大纹理高宽比。
- Becomes a painless and effective aspect of your development practice. 成为开发实践中轻松且有效的方面。
- And the technique index is the 8:1 depth-diameter aspect ratio. 其技术指标为长径比高于8:1板材深引伸技术。
- Texts will be placed correctly in every aspect ratio. 字幕可以正常显示在任何分辨率下了。
- To keep the same height-to-width proportions, select Preserve Aspect Ratio. 要保留相同的高宽比,请选择“保存高宽比”。
- This method is often used to change the aspect ratio of a video stream. 此方法通常用于更改视频流的高宽比。
- Decreasing furnace atmosphere pressure will increase HGM aspect ratio. 降低载气压力可以提高HGM的纵横比；
- Is the aspect ratio a reliable index for predicting the rupture of a saccular aneurysm? 动脉瘤的纵横比例是预测囊状动脉瘤破裂的可靠指标吗?
- Secondly,given a chord length and a relative ground clearance,the wings in ground effect with different aspect ratios and endplate are simul. 首先,对给定面积和离地高度下不同展弦比的地效翼进行数值模拟;然后,对给定弦长和相对飞行高度下不同展弦比和带端板的地效翼进行数值研究。
- In some cases, it’s also useful to constrain the resize to either a vertical, horizontal, or locked aspect ratio. 在某些情况下，让尺寸调整保持在水平方或者垂直方向上，或者是长宽比不变可能都非常有用。
- To make an Image preserve the aspect ratio of the image, set this property to Uniform (default) or UniformToFill. 为了让Image保留图像的长宽比,请将此属性设置为Uniform(默认值)或UniformToFill。
- Aspect Ratio: The ratio of the board thickness to the smallest-hole diameter of the printed circuit board. 板厚和最小孔直径的比值。
- Images and movies in a slideshow are scaled to fit the standard DVD window size, but the aspect ratio is preserved. 幻灯片显示中的图像和影片会缩放到标准DVD窗口大小,但宽高比保持不变。
- That's rather an effective use of color. 这种使用颜色的手法效果相当好。
- For the two stages brass tube with high aspect ratio, there are many challenges in the front of tool makers. 本文深引伸模具开发所应用的技术范围为多道次深引伸传送冲模技术。
