您要查找的是不是：
- The friction and wear characteristics of 45 steel pan against 45 steel pin under direct current magnetic field and at dry sliding friction and room temperature were studied. 在室温下,将45%23钢盘-销摩擦副置于直流线圈产生的磁场中,研究直流磁场对45%23钢干滑动摩擦磨损性能的影响。
- By using MMS-1G pin-disk high temperature & high speed friction and wear tester,the dry sliding friction and wear characteristics of CrNiMo steel-H96 copper couples in carbon dioxide atmosphere were investigated. 应用MMS-1G销盘式高温高速摩擦磨损试验机,研究了二氧化碳气氛条件下CrNiMo钢/H96黄铜配副的干滑动摩擦磨损特性。
- dry sliding friction and wear 干滑动摩擦磨损
- The friction and wear behavior of polyethersulfone (PES) composites reinforced with various carbon fibers was investigated on a pin on disc test rig under dry sliding against AISI1045 steel disc. 利用销-盘摩擦磨损试验机考察了聚醚砜及其复合材料在干滑动摩擦条件下的摩擦磨损性能.;结果表明:碳纤维使聚醚砜的摩擦磨损性能得到明显的改善;其改善程度同碳纤维的长度和体积分数相关;
- A series of self-lubricating compocites AFG,containing Al_2O_3, CaF_2 and glass, were hiped, and unlubricated sliding friction and wear tests were carried out at room temperature. 采用热压烧结工艺研制了Al2O3＋CaF2＋Glas（AFG）系列陶瓷自润滑复合材料，并对其室温干摩擦下的摩擦磨损行为及自润滑机理进行了研究。
- The tribological property of high Ni-Cr infinite chilled cast iron with different quantity of graphite and carbide under rolling friction and dry sliding friction conditions was studied. 本文研究了具有不同石墨和碳化物含量的高镍铬无限冷硬铸铁轧辊材料在滚动摩擦和干滑动摩擦条件下的摩擦学特性,考察了高镍铬无限冷硬铸铁中石墨和碳化物数量、分布对其摩擦学特性的影响。
- Friction and Wear Characteristics of Silicon Carbide Composite Doped With Nickel in Dry Sliding 含镍碳化硅复合材料的干摩擦特性
- Development of Electro-Contact Sliding Friction and Wear Testing Machine 电接触滑动摩擦磨损试验机的研制
- Study on the Friction and Wear Behavior of Several Frictional Pairs Used for Worm Drive under Dry Sliding Condition 蜗杆传动用摩擦副材料在滑动干摩擦条件下的摩擦磨损性能研究
- Keywords sliding collecting current;power metallurgy/pressing;pantograph slide friction and wear; 滑动集电材料;粉末冶金/挤压;滑板;摩擦磨损;
- Keywords molybdenum disilicide;45 quenched and tempered steel;sliding friction;friction and wear properties; 二硅化钼;45%23调质钢;滑动摩擦;摩擦磨损性能;
- The friction and wear properties of the sintered samples were analyzed. 对烧结后的样品进行了摩擦磨损性能研究。
- Dry Sliding Friction Wear of Cast Iron 铸铁的干滑动摩擦磨损
- Dry sliding friction between the polycrystalline Al 59Cu 25.5Fe 12.5B 3 quasicrystals (QCs) and the coating of diamond-like carbon (DLC) was carried out by self-made tribometer under different conditions. 在不同摩擦试验条件下 ,准晶材料Al59Cu2 5 5Fe1 2 5B3与类金刚石 (DLC)涂层在自制的摩擦仪进行了干摩擦试验。
- sliding friction and wear 滑动摩擦磨损
- The friction and wear properties of polytetrafluoroethylene(PTFE)reinforced with PTW at different PTW content, temperature, load and sliding speed were investigated. 考察了PTW含量、摩擦温度、载荷和滑行速度对其影响。
- The friction and wear properties of polytetrafluoroethylene (PTFE) reinforced with PTW at different PTW content, temperature, load and sliding speed were investigated. 考察了PTW含量、摩擦温度、载荷和滑行速度对其影响。结果表明，PTW-PTFE的磨损量仅是纯PTFE的1/10；
- Dry Sliding Friction Characteristics of Vermicular Graphite Iron 蠕墨铸铁的干滑动摩擦学特性
- Owing to the existence of micro hole in the coating of arc spraying, the excellent property of friction and wear can be obtained,especialy under the condition of a rapider sliding speed. 另外,电弧喷涂涂层中显微孔隙的存在,是使其具有优良摩擦磨损性能的主要原因,尤其在较高的滑动速度下,它的优异性能更加明显。
