您要查找的是不是：
- double fillet welded T joint 双面T字形焊接
- single fillet welded T joint 单面T形焊接
- Both single and double fillet welds shall be as follows unless otherwise shown on the drawing. 除非图上另外标明，所有单、双面贴角焊缝高度如下。
- double fillet welded joint 双面焊缝接口
- double fillet welded T-joint 双面丁字形焊接
- double fillet weld 双填角焊缝
- The existence of residual stress and brace plate in a fillet welded joint has obvious effects on CADC and fatigue life. 残余应力及角接接头中支板的存在对裂纹形态发展曲线和疲劳寿命有明显的影响
- Study showed that angle deformation of T joint is changed along the welded seam length. 研究表明,T形接头的角变形沿焊缝长度方向是变化的。
- A transversely stressed fillet weld can sustain higher loads than one stressed longitudinally. 受横向应力的角焊缝比受纵向应力的角焊缝承受能力强。
- single fillet welded lap (joint) 单面搭焊接
- Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld. 摘要在焦炭塔裙座上开设柔性槽能够减轻裙座刚度影响，降低裙座角焊缝处热应力。
- The butt weld is easier to inspect nondestructively than the fillet welds. 对接焊缝比角接焊缝更容易进行无破坏检查。
- Furthermore,a new simplified elastic method called as inherent shear strain method is developed for forecasting fillet weld's angular distortion. 在此基础上,进一步提出了一种用于预测角焊缝角变形的线弹性简化方法,即剪切固有应变法。
- Lamellar tearing of steel is a kind of very dangerous defect of the welding steel bridge and normally takes place at the fillet welding joint. 钢材层状撕裂是焊接钢桥中一种非常危险的缺陷,通常发生在角焊接头处。
- Brief Discussion of Fillet Weld Joint 浅谈压力容器中的角接接头
- The product contains compound antioxygen and proper rare earth, which have obvious effect on increasing weather fastness of non-conventional PVC and the strength of fillet weld . 由于本产品含复合抗氧剂和适量稀土元素，对于提高PVC异型耐侯性，增加焊角强度效果十分明显。
- non-load-bearing fillet weld joint 不承载角焊缝节点
- Weld joints with flush ends shall be beveled at the front side .Seal welds shall be welded with half the thickness of the carrying fillet weld. 尾带红点的焊点应把前侧切成斜角。密封焊道应焊成现角焊缝厚度的一半。
- Non-watertight weld joints and fillet welding for stiffening member shall be painted after block inspection. 加强构件的非水密焊接接合和填角焊应该在检查完分段后进行喷漆.
- Method of tension test for front fillet welded joint 正面角焊缝接头拉伸试验方法
