您要查找的是不是：
- double reheat steam turbine 二次中间再热式汽轮机
- After putting into operation one year, the domestic300 MW steam turbine needs to open one or two more governing valves to carry load under the same main steam parameters, reheat steam parameters and condenser vacuum. 某国产300mw机组投产运行1年后,在基本相同的主、热蒸汽参数和凝汽器真空下,带相同的负荷,需要比以前多开一至一个半调门。
- Investigation of a Method for Correcting the Performance Test System of a Reheat Steam Turbine 再热汽轮机性能试验系统修正方法研究
- Improving on the Defining Method of Reheat Steam Turbine Ideal Cycle Thermal Efficiency 中间再热式汽轮机理想循环热效率定义方法的改进
- Analysis of Thermal Economic Benefits of First Stage Extraction Location after Reheat of Reheat Steam Turbine Set with Outside Steam Cooler 装设外置式蒸汽冷却器的再热机组再热之后第一级抽汽位置对热经济性的影响
- Cause Analysis of Cracks in Steam Turbine. 汽轮机转子裂纹原因分析及运行安全措施。
- QINGDAO JIENENG STEAM TURBINE CO., LTD. 青岛捷能汽轮机股份有限公司。
- STUDY ON POWER-CORRECTING CALCULATION FOR PERFORMANCE DEGRADATION OF REHEAT STEAM TURBINES 再热汽轮机性能老化对功率的修正计算研究
- In a steam turbine, steam from pipes is directed onto the blades. 涡轮机内的蒸汽从管内导至叶片上。
- At the higher temperatures, the efficiency is often boosted still further by using double reheat. 在较高的温度下，效率往往是通过进一步利用二次再热得以增加。
- Forecast of Market Development for Industrial Steam Turbine. 工业汽轮机市场需求结构与预测。
- The steam turbine is less economical at cruising speed. 汽轮机的巡航经济性较差。
- DEH is the model form of modern steam turbine control system . 数字电液控制系统DEH(Digital Electro-Hydraulic Control System)是现代汽轮机控制系统的典型形式。
- The thermal balance matrix equation for thermodynamic system of a power unit with double reheat was derived, in which the rules to fill were represented. 针对热力系统与机械系统耦合的典型动力装置,研究提出了统一建模的功率键合图方法。
- By the combined use of a prediction control and PID controller in the control of a reheat steam temperature system. 将其应用于火电机组过热汽温控制进行仿真研究 ,结果表明所提出的预测控制算法具有优良的控制性能和很好的鲁棒性。
- The reheat steam temperature is controlled by regulating gas baffle and spray desuperheating auxiliarily. 再热汽温主要采用烟气挡板调节,辅助采用喷水减温控制。
- In tangential combustion system,the reheat steam temperature can be adjusted by changing burner nozzle angle to just the flame position. 在切向燃烧系统中,通过改变燃烧器喷口的角度可以调节炉内火焰中心位置,可达到调节再热汽温的目的。
- The TG70 steam turbine has a operation speed of9600 rotations per minute( RPM). TG70型蒸汽透平的运转速度为每分钟9600转。
- Discussion on theChoice of High Temperature Bolt Material for steam Turbine. 再论汽轮机高温螺栓材料的选择。
- Optimization Model of Life-time Management for large Steam Turbine Units. 大型汽轮机组的优化寿命管理模式。
