您要查找的是不是：
- direct laser deposition 直接激光沉积
- Pulsed Laser Deposition using Excimer Lasers. 应用准分子激光器的脉冲激光沉积。
- Investigation of AlN Thin Films Prepared by Pulsed Excimer Laser Deposition[J]. 引用该论文 黄继颇;王连卫;高剑侠;林成鲁;周艳萍.
- Hard dots Half-tone sots produced either by contact or by direct laser scanning.See Soft dots. 由接触復制或由激光直接扫描而得的半色调点子。参阅软点。
- Using sintered B4C as target material, ternary BCN thin films were synthesized by means of pulsed laser deposition assisted by nitrogen ion beam. 以烧结B4C为靶材料、在氮离子束辅助下用脉冲激光沉积方法制备了三元化合物硼碳氮(BCN)薄膜。
- Hard dots: Half-tone sots produced either by contact or by direct laser scanning. 硬点:由接触复制或由激光直接扫描而得的半色调点子。
- Lead Zirconate Titanate Thin Films Produced by Pulsed Excimer Laser Deposition[J]. 引用该论文 陈逸清;郑立荣;林成鲁;邹世昌.
- The growth of ABAC structured film by means of pulsed laser deposition was simulated by the Monte Carlo procedure. 摘要采用蒙特卡罗方法计算机模拟脉冲激光沉积ABAC结构薄膜生长。
- A blue violet laser is described by direct laser diode frequency doubling with a new nonlinear organometallic complex CMTC crystal. 报道了用新型络合物非线性光学材料硫氰酸汞镉（CMTC）晶体实现激光二极管室温下直接倍频，产生蓝紫光激光输出。
- Christoph Ader, ”Direct Laser Sintering of Ceramic State of the Art report”, Fraunhofer Institut Produktionstechnologie., 2002. 范光照、章明、姚宏宗、许智钦、郑正元，逆向工程技术及应用，高立图书有限公司，2003年。
- BaTiO_3/SrTiO_3 (BTO/STO) multilayer films have been fabricated on Pt/Ti/SiO_2/Si substrates by a pulsed laser deposition method. 采用脉冲激光沉积法在Pt/Ti/SiO2/Si衬底上制备了BaTiO3/SrTiO3(BTO/STO)多层膜。
- In this paper, we mainly introduce the basic principle, characters, merits and demerits of the pulsed laser deposition (PLD) technique. 本文主要介绍脉冲激光沉积技术的基本原理、特点、优点和缺点。
- THE LASER DEPOSITE REPAIR OF DISK FOR IMPORTEDFLUE GASEXPANDER. 进口烟机轮盘的激光熔敷修复。
- And other PVD methods, such as sputtering deposition, ion beam assisted deposition, and pulsed laser deposition, are also used to prepare BCN thin films. 同时，各种PVD方法也被用来制备硼碳氮薄膜，如溅射法、离子束辅助沉积和脉冲激光沉积等。
- The work contains the following aspects: 1.Describe the process of the fabrication of titanium dioxide thin film using a magnetron sputtering and pulsed laser deposition. 内容和结论主要包括:1.;采用磁控溅射和脉冲激光沉积方法制备二氧化钛薄膜的过程。
- Pulsed laser deposition is a new technique for producing thin film in the recent years.It shows the unique advantages for the deposition of bioactive ceramic. 摘要脉冲激光沉积是近年来出现的一项制备薄膜的新技术，在制备生物活性陶瓷涂层方面显示出独特的优越性。
- ICGA can show the CNV which FFA can not. ICGA is more sensitive and accurate than FFA to show the numerous, location and range of CNV. So ICGA is an important method to diagnose exudative AMD and to direct laser coagulating. ICGA能发现 FFA不能发现的 CNV,在显示 CNV的数量、位置、范围等方面比 FFA敏感和准确 ,是诊断渗出型 AMD的 CNV和指导其激光光凝的?
- Pulsed laser deposition(PLD) is a new technique for producing thin film in the recent years.It shows the unique advantages for the deposition of bioactive thin films. 脉冲激光沉积是近年来出现的一项制备薄膜的新技术,在制备生物活性薄膜方面显示出独特的优越性。
- The effects of oxygen pressure and dopant ratio on the resistivity and optical transmittance of ZnO:Al films by pulsed laser deposition have been investigated. 结果表明:掺杂比、氧分压强影响着膜的电学、光学性能和膜的结晶状况。
- She cast her eyes down to avoid direct eye contact. 她垂下双目以避免对视。
