您要查找的是不是：
- Dip coating: Coating method in which the web is passed around a roller immersed in solution. 浸渍涂布:纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
- The preparation of WO 3 thin films has been reported using a sol gel process together with the dip coating method, and tungsten powder being the raw material. 以金属 W粉为无机原料 ,溶胶 -凝胶技术结合浸渍镀膜方法制备出 WO3 薄膜 ,借助 SEM、可见光分光光度计、椭偏仪等仪器测量了薄膜的特性。
- The preparation of nano porous tungsten oxide films has been reported using a sol-gel process with the starting tungsten powders together with the dip coating method. 以金属W粉为无机原料 ;采用溶胶 -凝胶技术 ;结合浸渍镀膜方法 ;制备出纳米多孔WO3薄膜 ;研究了热处理对薄膜性能的影响 .
- With SnCl_45H_2O, (Sb_2O_3) and (Gd(NO_3)_3) as the raw material, the SnO_2/Sb DSA electrodes doped Gd were prepared by Dip coating method and sol-gel method. 分别采用浸渍法、溶胶-凝胶法;SnCl4.;5H2O;Sb2O3和Gd(NO3)3为原料;制备了稀土Gd掺杂SnO2/Sb涂层电催化电极
- Tin oxide nano-particles prepared were well dispersed into the antimony-doped tin oxide coating solutions, and transparent conductive films were prepared from the solution by sol-gel dip coating method. 采用溶胶凝胶浸渍镀膜的方法制备Sb掺杂SnO2薄膜,在镀膜溶液的配制过程中引入SnO2纳米颗粒悬浮液,经陈化后最终得到镀膜溶液。
- But a more compact film with higher loading and larger size of TiO2 but lower specific photocatalytic efficiency (ethylene conversion over unit mass TiO2 and unit area of TiO2 film) was obtained by EPD compared with dip coating method. 但由于电泳膜有较高的TiO2沉积量、且结构致密、TiO2的粒径较大，其比活性（单位面积上单位质量TiO2的光催化活性）却比提拉膜的低。
- dip coating method 提拉法
- Coating method:Rubber roll coating method. 涂布方式：胶辊涂布方式。
- TiO_2 nano thin film was prepared on ITO glass substrate by dip coating and spin coating process. 以TiCl_4和C_(16)H_(36)O_4Ti溶胶为前驱体,分别采用旋转-涂覆法和浸渍-提拉法制备了纳米TiO_2薄膜。
- PVA coated gloves for solvent resistance were obtained through dip coating. 用浸渍涂膜技术成功制备了一种耐有机溶剂的PVA涂膜手套。
- Main factors of influencing photoresist thickness for dip coating is analysed in this paper. 分析了提拉法涂胶中影响胶膜厚度的主要因素，并据此确定出胶膜厚度；
- Porous anatase TiO 2 nanometer thin films were prepared from alkoxide solutions containing polyethylene glycol by a dip coating technique. 锐钛矿型 Ti O2 多孔纳米薄膜可以从含聚乙二醇的钛醇盐溶胶前驱体中通过浸渍提拉法制备 ;
- Pure and Pt doped ( m( Pt ):m( WO 3)=0.3%) WO 3 thin films were prepared using the sol gel process by the dip coating technique on alumina substrates. 用溶胶凝胶浸渍技术在三氧化二铝基片上制备了纯和 (m(Pt) :m(WO3 ) =0 .;3%25 )铂搀杂的三氧化钨膜
- L. E. Scriven, “Physics and Applications of Dip Coating and Spin. Coating”, Mat. Res. Soc Symp. Proc., 121, p717, (1988). 黄启涵，“以溶胶凝胶法制备施受体共掺杂钽酸锶铋薄膜”，国立东华大学材料科学与工程学研究所硕士论文，(2003)。
- PSf/PEO-AgBF_4/SR asymmetric hollow fiber membranes were prepared using double coating method. 用“二次涂层”方法制备了涂层含银离子的PSf/PEO-AgBF_4/SR非对称中空纤维复合膜。
- The production of spunbonded terylen needlepunching waterproof base cloth can be completely by direct dip coating and drying. 纺粘涤纶针刺防水基胎布可在线直接进行浸胶和烘干完成。
- Compared with traditional coating, this coating method will not result in phenomena like over-coating or coating rebound, so paint loss is cut down. 与传统式空气喷涂方法相比,级减少喷涂过量及反弹现象,从而减少涂料损失。
- The performance, microstructures and the failure mechanism of laminated Bi2Te3/FeSi2 prepared by dip coating using tin-based alloys as bridge materials have been investigated. 以Sn基合金为焊接材料，采用热浸焊技术制备了Bi_2Te_3/FeSi_2叠层热电材料，并系统地分析研究了叠层热电材料的性能，焊接过渡层的微观组织结构以及过渡层在热加工及模拟服役过程中的破坏机制。
- Blade coating Paper coating method where a surplus of coating is applied to the web and then levelled and controlled by a flexible steel blade. 刮刀涂布一种涂布方法。把大量的涂剂放于纸卷上面,然后把多余的涂剂用软性刮刀刮去,同时平滑涂层表面。
- The porous TiO 2 anatase thin films deposited on glass were prepared from titanium alkoxide solution containing polyethylene glycol (PEG) by dip coating technique. 从含聚乙二醇的钛醇盐溶胶前驱体出发 ;通过浸渍提拉法在玻璃表面制备了锐钛矿型多孔TiO2 薄膜 .
