您要查找的是不是：
- From the result of experiment,the vision sensor system get the image that can reflect the weld track of TIG Deposit surfacing welding clearly. 从实验结果来看视觉传感系统所得到的图像能够清晰反映出TIG熔敷堆焊的焊接轨迹。
- It researches the TIG Deposit surfacing welding rapid shaping vision sensor system. 对于TIG熔敷堆焊快速成形视觉传感系统进行了一定的研究;
- By analyzing the principle of TIG deposit surfacing welding rapid shaping,we introduce the function that using CCD to detect TIG deposit surfacing welding rapid shaping. 通过对TIG熔敷堆焊快速成形的原理的分析,介绍了选择CCD作为TIG熔敷堆焊快速成形视觉传感器的功能;
- deposit surfacing welding 堆焊工艺
- deposit surfacing welding track 堆焊轨迹
- TIG deposit surfacing welding TIG熔敷堆焊
- Used for surfacing welding high-Mansteel. 高锰钢堆焊。
- For surfacing welding on cold die and cutting tool. 冷冲模及切削刀具的堆焊。
- The paper researches the relation of parameters and weld width of TIG deposit surfacing used in rapid prototyping. 研究了用于快速成形的TIG熔敷堆焊工艺中各参数与焊缝宽度的关系。
- For surfacing welding roller and over-heat steam valves. 轴及过热蒸汽阀门的堆焊，堆焊金属具有空淬特性。
- Based on a lot of experiments and the data of weld width of TIG deposit surfacing,influencing parameters of weld width and the criterial welding measure during TIG deposit surfacing are advanced. 在大量试验的基础上,对TIG熔敷堆焊焊缝宽度进行数据分析,得出了在TIG熔敷堆焊情况下焊缝宽度的影响参数,提出了关于TIG熔敷堆焊焊接的规范措施。
- Used for surfacing welding high-Mn steel, including various part of heavy impact abrasion resistance. 高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊。
- Used for surfacing welding on middle hardness under normal temperature, such as axle. 常温硬度堆焊。如车轴等磨损面。
- Used for surfacing welding on low hardness under normal temperature such as axle. 常温低硬度堆焊。如车轴等磨损面。
- For surfacing welding the face of easy wear out parts in crusher, high-manganese track, bailing bucket, bulldozer etc. 用于各种破碎机、高锰钢轨、戽斗、推土机等受冲击而易磨损部分的堆焊。
- Used for surfacing welding on low hardness under normal temperature and repairing of mining machinery. 常温低硬度堆焊。适用于矿山机械的堆焊与修补。
- The infeuence of using intermediate layer on reducing hot crack of pinch roller of surfacing welding was studied through experiment. 本文经过实验,从实践上和理论上研究了采用过渡层对减少其热裂纹的影响。
- By using water immersion focusing method in an ultrasonic C-scan inspection system,the quality of Cu/steel surfacing weld was evaluated. 采用高频堆焊方法在碳素钢基体上堆焊一层耐磨覆层材料,用正交试验方法研究了焊料成分对高频堆焊性能的影响。
- Used for surfacing welding under normal temperature on high hardness, and repairing the parts of dredger, mining machinery. 常温高硬度堆焊，用于堆焊挖斗、矿山机械等受磨损的机件表面。
- The micromorphology of fracture and deposition surface was observed by SEM. 用扫描电镜观察材料断口和热解炭沉积表面的形貌；
