您要查找的是不是：
- It puts forward an effective deep drawing technology about the alloy board with low-alloy and high-strength so that the properties of motor combustion chamb... 从而提出了一套行之有效的低合金高强度合金板的拉深工艺,确保发动机燃烧室壳体的质量满足系统性能要求。
- Method for Determination of Filleting in Progress Picture Sheet for Deep Drawing Technology and Automatic Dimensioning 拉深工序图中圆角和自动标注问题的处理方法
- deep drawing technology 拉深工艺
- Containers, lids and deep drawing injection moldings. 容器、盖子和深拔注塑。
- Deep drawing stcel for auto headtamp fuel tank, car door and windows. 汽车前车灯、油箱、轿车门、窗等深冲压成形加上用钢。
- An analytical model is established for axisymmetric parts in deep drawing. 摘要建立了轴对称件拉深侧壁起皱的数学模型。
- At last, the paper introduces dynamical exploring and realistic image drawing technology of 3D buffer using OpenGL. 最后,本文介绍了利用OpenGL实现缓冲区的三维空间动态浏览和真实感图形绘制。
- The paper discusses the points and details process of the Drawing Technology in Tube- Shaped parts, and try to CAD System of the drawing die. 论述了筒形件拉深工序设计中的关键问题和详尽的处理流程,并对筒形件拉深模cad系统开发进行了尝试。
- The deformation of cone-box shaped part in hydromechanical deep drawing is simulated by the FEM software ANSYS. 摘要利用大型有限元分析软件ANSYS对锥盒形件充液拉深的成形过程进行了数值模拟。
- A new push_pull drawing technology is put forward according to the post drawing deformation of cylindric part. This technology is theoretically analyzed and evaluated in detail. 针对筒形件的后续拉深变形提出了一种新的推拉拉深工艺方法，并对此进行了较详细的理论分析和试验研究。
- The 3D simulation model of box deep drawing was presented and validated with the homologous experiment. 摘要建立了矩形盒拉深成形的三维仿真分析模型，并将其与实验结果进行了对比验证。
- FU Qiang,WU Jian.Research on the drawing technology of thinner top-coal in longwall sublevel caving mining[J].Ground Pressure and Strata Control,2000,17(3):2-6. [7]富强;吴健.;顶煤较薄煤层综放开采放煤工艺研究[J]
- Abstract: Blank holder structure and blank holder force （BHF） are very important to the part quality in deep drawing. 摘 要: 压边结构及压边力对板料拉深成形质量有着重要影响。
- Kawai N.Critical conditions of wrinkling in deep drawing of sheet metals. JSME. 1961. 梁炳文.;胡世光
- They are deeply drawn by God and they adore Him. 常被神的作为深深吸引并爱慕神。
- The finite-element code ANSYS/LS-DYNA was used to simulate the process of rectangular box deep drawing. 利用有限元软件ANSYS/LS-DYNA研究变压边力对矩形件拉深成形性能的影响。
- Deep drawing experiments were carried out for tailor\|welded blank square boxes. 本文对拼焊板方盒件的拉深成形进行了试验研究。
- A new method has been used to simulate the actual blank holding process in deep drawing of a washing trough. 采用新的研究方法模拟水槽拉伸的实际压边过程。
- The finite element model of hydro-mechanical deep drawing is established based on the commercial software DYNAFORM-PC. 采用商用有限元软件DYNAFORM-PC，建立了筒形件液压-机械拉深过程数值模拟模型。
- Solid solution heat treatment and hard drawn technology have been used to manufacture 303HS cutting aus-tenitic stainless steel hexagonal bar. 介绍了用固溶热处理、冷抽工艺生产303HS切削奥氏体不锈钢异型材六角棒的过程。
