您要查找的是不是:
- The graft copolymer was indentified by IR. 利用红外光谱对接枝共聚物进行了表徵。
- In addition, the graft copolymer have a clear IEP like gelatin does. 该接枝物仍具有较明显的等电点。
- The results indicate the copolymer to be a graft copolymer in which short chains of novolic are grafted on long chains of CPE. 结果表明该共聚物是一个接枝共聚物,较短的线型酚醛链段接枝于较长的氯化聚乙烯分子链上。
- Abnormal viscosity-concentration curve of the graft copolymer was also measured. 测定了接枝共聚物的异常粘度一浓度曲线。
- The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide. 絮凝剂(SPAN)是不同接枝率的演粉与聚丙烯酰胺的接枝共聚物。
- Recycled HDPE/wood powder composites were modified by the ternary-monomer solid phase graft copolymer of PE(GPE). 采用自制的聚乙烯与三单体固相接枝共聚物(GPE)对废旧高密度聚乙烯/木粉复合材料进行改性。
- It is found that the vibration damping performemce of the graft copolymer was affected by the amount of PVMS. 大分子硅单体的加入大大改善了丙烯酸酯共聚物的低温阻尼性能,而引发剂用量对共聚物的阻尼性能影响较小。
- When thermally mixed with PBT this graft copolymer is found to be effective in forming compatibilizer of L... 该接枝聚乙烯与PBT熔融共混时可就地生成具有增容作用的特殊的聚乙烯-PBT接枝共聚物。
- The flocculant“SPAN”is the graft copolymer of different grafing of Starch-polycrylamide. 絮凝剂(SPAN)是不同接枝率的淀粉与聚丙烯酰胺的接枝共聚物。
- The graft copolymer EPDM-g-MMA with good mechanical properties could prepared under optimum conditions. 在适宜条件下,可以制得较好综合性能的接枝共聚物。
- Four graft copolymer were used as compatilizer to improve compatibleness of PP/PA6 blend. 采用4种接枝共聚物作为增容剂来提高PP/PA6共混物相容性。
- The results indicate that the compatibility and the mechanical properties of PP/PA1010 blends were improved with the add of the grafted copolymer PP-g-GMA. 结果表明,在PP/PA1010共混体系中加入PP-g-GMA后,改善了PP与PA1010的相容性,对该共混体系的力学性能有明显提高。
- The synthesis of AM/AMPS/DEDAAC/Starch graft copolymer filtrate reducer for mud and its property are described. 介绍了AM/AMPS/DEDAAC/淀粉接枝共聚物泥浆降滤失剂的合成方法,并对其性能进行了室内评价。
- The struc-ture and physical mechanical properties of graft copolymer depend on the rate of graft. 接枝共聚物的结构和物理性能与接枝率有关。
- It is a preparation method of water-absorbent starch graft copolymer suitable for industry application. 合成适用于工业生产的淀粉接枝共聚物保水剂。
- The poly(methyl methacryate)macromer was copolymerized with butyl acrylate i n benzene to form the graft copolymer. 研究了聚甲基丙烯酸甲酯大单体与丙烯酸丁酯在苯中的共聚。
- It was found that the cell granularity did not change significantly in PEG-PCL block copolymer yet increased substantially in PCL-PAA (non PEG grafted copolymer). 与PEG-PCL交互作用后发现巨噬细胞的颗粒性并未显著增加,但在PCL-PAA(非聚乙醇化高分子)交互作用下细胞颗粒性明显增加。
- From TEM and DSC,it was found that the latex particles of the grafted copolymer looked like snowmen, while those of the non-grafted polymer and blended polymer were round. 实验结果表明:接枝聚合物的乳胶粒呈雪人型,而未接枝的、共混的丙烯酸乳液粒子呈圆形。接枝聚合物的玻璃化温度与未接枝、共混的丙烯酸乳液不相同。
- This paper described the adhesiveserength of the graft copolymer PE-g-MAHto metal, and studied the relation of graftrate to adhesive strength. 介绍了聚乙烯接枝马来酸酐共聚物与金属的粘接强度,并对接枝率与粘接强度的关系进行了研究。
- The graft copolymer CR-g-BMA was prepared on CR initiated by BPO,with BMA as graft monomer,toluene and ethyl acetate as solvents. 以甲基丙烯酸丁酯(BMA)为接枝单体,甲苯、乙酸乙酯为溶剂,过氧化苯甲酰(BPO)为引发剂,在氯丁橡胶(CR)上进行接枝共聚。