您要查找的是不是：
- corrosive products membrane 腐蚀产物膜
- corrosion product membrane 腐蚀产物膜
- When the leak involves a corrosive product, however, the leak will generally worsen because the corrosive material attacks the leak point. 但是当泄漏同腐蚀性产品有关时，由于腐蚀性材料侵蚀泄漏点，泄漏一般会恶化。
- Oil breakdown and corrosive products of combustion can cause bearing corrosion. 机油损耗和燃烧的损耗产品能引起轴承损耗。
- The resultants were characterized by IR, DSC.The tensile strength and water adsorption of the product membrane increased. 对该聚电解质用IR、DSC表徵，并检则其拉伸性能和吸水率，效果很好。
- The resultants were characterized by IR, DSC.The tensile strength and water adsorption of the product membrane increase... 对该聚电解质用IR、DSC表征,并检测其拉伸性能和吸水率,效果很好。
- Extensive corrosion product was found on all surfaces. 在所有表面上都发现了大范围的锈蚀。
- The corrosion product was exa- mined by means of SEM,EMP and X-ray diffraction. 用 SEM,EMP 和 X 射线衍射分析腐蚀产物。
- Figure 3 EDS spectrum of steel corrosion product covered in aluminosilicate. 图3硅酸铝对金属的腐蚀产物EDS图。
- The corrosion products of the steel ares mainly composed of Fe oxides(Fe_2O_3,Fe_3O_4). 经过30 d的腐蚀后;试样的腐蚀产物主要为铁的氧化物(Fe2O3;Fe3O4).
- The corrosion products on the I-SCC fracture of Zr-Sn-Nb alloys have been investigated by SEM and EDXA. 利用SEM和EDXA对Zr-Sn-Nb合金碘致应力腐蚀断口上的腐蚀产物进行了观察分析。
- Dealloying corrosion and corrosion products of Cu-Al-Mn alloy were studied by EPM technology. 采用电子探针技术研究了Cu-A l-Mn合金脱合金腐蚀现象及其产物。
- The morphology of corrosion products and scale structure were examined with OM,SEM/EDX and XRD. 利用金相、扫描电镜 /能谱及X射线衍射等分析其腐蚀形貌、成分及结构 .
- EDXA results present that the components of corrosion products in biofilms with different growth period are different. 电子能谱对生物膜表面分析结果表明 ,不同生长期生物膜腐蚀产物的Fe/S比各不相同。
- "Normally, corrosion products (e.g., rust, patina) stay on the surface and protect it. 一般腐蚀产物（例如锈、铜绿）会停留在金属表面，并加以保护。
- The composition and morphology of the inclusion will affect the spillage position of the corrosion products. 夹杂物的成分及形态的不同都会影响到产物的溢出位置和方式。
- The surface observation reveals that the corrosion products are agglomerate and accidented. 腐蚀产物微观形貌呈团块状且凹凸不平；
- Hower the corrosion products of the long chain fatty acids of high boiling point chain can dissolve in oil. 高沸点长链脂肪酸腐蚀产物在实际原油加工过程中也是油溶性的。
- Zinc is a chemically active metal, but its corrosion products are generally dense and adherent. These two facts explains the value of this metal. 锌是一种化学性质活泼的金属，但它的腐蚀生成物一般有高的密度和附着力。这两点特性说明了这一金属的价值。
- The corrosion resistant alloys(CRAs)for oil and gas industry is carried out to consider the stability of corrosion products. 石油天然气工业的耐蚀合金(CRAs)设计要考虑腐蚀产物的稳定性。
