您要查找的是不是：
- cooling during rolling 中间冷却
- In the absence of heat, I think, no oxide coating should form during rolling. 在无加热的条件下，我想，轧制过程中不会生成鳞皮吧！
- It is very cool during autum in Beijing. 北京的秋天很凉爽。
- In the absence of heat , I think , no oxide coating is forme during rolling. 在无加热的条件下，我想，轧制过程中不会生成鳞皮吧!
- In the absence of heat,I think,no oxide coating should form during rolling. 在无加热的条件下，我想，轧制过程中不会生成鳞皮吧！
- The system pressure had very big fluctuation during rolling process. 在轧钢过程中系统压力出现大幅度波动。
- The inner stress produced by quick cooling during quenching is the basic reason of formation of quench-distortion of parts. 摘要淬火过程中的快速冷却在工件内部产生的内应力是导致淬火变形的根本原因。
- Water used for cooling during compression of air should be monitored for microbiological quality when in contact with the medicinal gas. 空气压缩时使用的冷却水与医用气体接触时须监控该冷却水的微生物指标。
- However, it develops that the rate of cooling during the expansion in any practical nozzle is too fast for the recombination to occur. 然而，实际情况是，然后实际喷管里气流膨胀时冷却速度都很快，使分子来不及重新化合。
- Excellent tonic and skin toner, especially useful for cooling during hot weather, great as a cooling foot spray for tired sweaty feet. 特性:良好的皮肤滋补剂,尤其是在炎热的季节,可令你有清凉的感觉,喷在脚上亦可舒缓疲劳。
- The temperature field of the bar in and out the deformation zone during rolling is simulated by FEM. 采用有限元方法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。
- The inner stress produced by quick cooling during quenching is the basic reason of formation of quench-distor- tion of parts. 淬火过程中的快速冷却在工件内部产生的内应力是导致淬火变形的根本原因。
- This paper has investigated the neutral angle during rolling in four-roll passes which consist of two-horizontal rollers and two-vertical rollers. 本文研究了由两个水平辊和两个立辊所构成的四辊孔型中轧制时的中性角。
- The variation of volume fractions for static and dynamic recrystallization, and austenite grain size during rolling process are obtained by model calculation. 通过对再结晶动力学模型的解析，得到了静态再结晶、动态再结晶的分数以及奥氏体晶粒在轧制过程中的变化情况；
- The Rishab Shirt\'s cotton fabric keeps you comfy and cool during your presentation, and prAna screened its label on the inside collar, so you\'re not distracted by an itchy tag. 不是特殊渠道从大陆、越南等代工厂出来的残次品、样品、仿单、余单、原单、跟单、尾单、跟单或退单。
- It is found that the crystallinity and the orientation of macromolecule are the main reasons changing the mechanical properties and the great changes are happened during rolling. 结果发现，结晶度和大分子链的取向是影响材料力学性能的主要原因，力学性能的变化主要发生在轧制过程中。
- Okhla, when we reached it, proved to be a scatter of huts with earthen walls plastered with cow-dung which kept the interiors cool during the day and was used as fuel when it had dried. 我们到达奥克拉的时候，结果发现那只是一群散落着的茅棚，茅棚的墙上贴着牛粪，它使茅棚白天凉爽，牛粪干了的时候还可以当燃料用。
- The results show that "the frame-pack rolling" technology can increase the densify, avoid cracking during rolling, and effectively improve the deformability and mechanical prope... 结果表明:外框限制轧制工艺提高了喷射沉积多孔材料的致密度,避免了轧制过程中裂纹的形成,有效地改善了喷射沉积板坯的轧制性能及材料的力学性能。
- When the bled of the slab surface are extended during rolling, the slab surface is delaminated and form the surface upwarping when the gas in the bled escape along the gap of delamination. 对该类缺陷的成因进行了分析和推理,认为是铸坯表层气泡在轧制延伸过程中造成钢板分层并在表层逸出导致开裂形成翘皮。
- When the bled of the slab surface are extended during rolling, the slab surface is delaminated and form the surface up-warping when the gas in the bled escape along the gap of delamination. 对该类缺陷的成因进行了分析和推理，认为是铸坯表层气泡在轧制延伸过程中造成钢板分层并在表层逸出导致开裂形成翘皮。
