您要查找的是不是：
- YORK Cooling King air-conditioners also achieved breakthroughs in technological excellence in the cooling capacity. YORK Cooling King冷气机的冷气能量也取获工艺性的突破。
- A split stirling 2-stage plastic cryocooler with a cooling capacity of 0. 364W at 77K is described in the paper. 该文介绍了一种分置式斯特林制冷循环二级无磁制冷机，该机在77K时有0.;364W的制冷量。
- With the rapid development of the infrared focus plane, a 2w of cooling capacity at 80K cryocooler is needed. 红外焦平面技术的迅猛发展,迫切需要制冷量2W、制冷温度80K、寿命30000小时以上的大冷量制冷机。
- The more the cooling capacity of the high temperature evaporator, the higher the COP can be improved. 高温蒸发器制冷量越大，双温压缩／喷射混合蒸气压缩制冷循环的制冷系数的提高幅度越大。
- Also, passing supply air through the floor void improves the cooling capacity of both ceiling and floor. 同样，通过地板间层空间提供通风可以同时提高地板和下层天花板的冷却能力。
- The cooling capacity of an air-conditioner is measured in Btu hr, the higher the Btu hr, the faster the cooling capacity. 冷气机的冷却能量度量是以Btu为单位。越高的Btu单位,其冷却能量就越快。
- Yap added that, apart from the breakthrough in its cooling capacity, YORK Cooling King has also many innovative features. 他补充说,除了突破冷却能量之外,YORK Cooling King还有许多的创新特点。
- The cooling capacity and COP increase with increasing the generating and evaporating temperature and decrease with increasing the condensing pressure. 系统的制冷量和性能系数随发生压力的升高而升高,随冷凝压力的升高而降低,随蒸发温度的升高而升高;
- Suitable for CO2 and YAG large power laser equipments, such as laser cutter etc. with cooling capacity from 8.7KW to 115KW. 适用于以CO2及YAG为激光机工作介质及功率较大的激光加工设备，如激光切割设备，制冷量从8.;7KW至115KW。
- The heating and cooling capacity, and primary energy consumption of the GEHP at different ambient temperature, supply water temperature and engine ... 对机组在不同环境温度、不同出水温度和不同转速下冷热量和一次能耗进行了测试。
- The automotive A/C calorimeter which is introduced from USA is used to test the cooling capacity of A/C for different vehicles.Test is 18 KW. 汽车空调系统性能试验台从美国引进，制冷能力测试范围可达18KW，是目前国内最先进的汽车空调测试系统，可以对轿车、客车、工程车、卡车等各种车用空调系统进行性能检测，提供可靠数据。
- He claimed that this model, manufactured locally by OYL industries Bhd, is touted to be the air-conditioner model with the highest cooling capacity in the market. 他称,这个由奥维尔工业制造的产品,是市面上冷却能量最高的冷气机。
- The results show that ESWAC is feasible. Compared with original air conditioner, average cooling capacity increases by 28.2%, and COP increases by 21.5%. 同原来空调器比较 ;复合空调器制冷量平均增加 2 8.;2%25;性能系数平均增加 2 1
- The experimental result shows that using electronic expansion valve instead of thermal expansion valve , the cooling capacity increases by 11.4%, COP increases 9.6%. 试验表明:使用电子膨胀阀对比使用热力膨胀阀;机组的制冷量提高11.;4%25以上、COP提高9
- The maximum cooling capacity was 1.8kW with COP of 0.259 when the booster was absent, or the maximum cooling capacity was 5.2kW with COP of 0.777 when the booster was present. 系统最大制冷能力1.;8kW、平均COP为0
- The reason for cooling capacity insufficiency of regenerative cryocooler is analyzed.Modifications have been done to realize the designed production of liquid nitrogen. 针对制氮设备回热式制冷机产冷量不足的现象,分析了原因,并采取了相应措施,从而保证了制氮设备的液氮产量。
- Sets up mathematical models, and quantitatively analyzes the effect of variable chilled water flow on cooling capacity and dehumidifying capacity of air coolers and fan coils. 建立了热湿参数与冷水流量之间关系的数学模型,定量分析了变流量对空调末端设备的换热和除湿性能的影响。
- Stand-alone cooling capacity from 6,000 kcal / hour to 1.3 million kcal / hour, can be widely used in civil construction and industrial cooling systems. 单机制冷量从6000大卡/小时到1300000大卡/小时，可广泛用于民用建筑及工业冷却系统。可根据用户的需求定制各种用途的风冷、水冷式冷水机、冷冻机。
- The experimental results showed that an appropriate vacuum degree and volume fraction of liquid should be chosen for maximizing the cooling capacity of the evaporator. 实验结果表明，采用适当的真空度和液容率，可以提高微槽群蒸发器的散热效果。
- Suitable for YAG laser equipments, such as laser marker, laser cutter, laser welder, laser driller, laser wire-cutter etc. with cooling capacity from 1.6KW to 8.7KW. 适用于以YAG为激光机工作介质的激光加工设备，包括激光达标、激光切割、激光焊接、激光打孔、激光划线等设备、制冷量从1.;6KW至8
