您要查找的是不是：
- Replace the cylinder outlet seal and valve cap. 替换钢瓶排气口密封和阀门帽。
- control valve cap 控制阀盖
- Wuxi ChengXin Auto Control Valve Co., Ltd. 无锡市诚信自控阀门有限公司。
- Rethink your control valve maintenance. 采用新的诊断工具提高控制阀维修的可靠性。
- Repeat steps2-5 until proper sag is achieved, then replace the air valve cap. 重复2－步骤以达到最佳预压行程后，盖上气阀嘴帽。
- Metal gravity and low pressure casting, sand gravity and low pressure casting, high pressure switch eclectric casting; cylinder cap, intake manifold, control valve body and so on. 金属型重力、低压铸件,砂型重力、低压铸件,高压电器铸件;气缸盖、进气岐管、调节阀阀体等。
- Repeat steps 2-5 until proper sag is achieved, then replace the air valve cap. 重复2－5步骤以达到最佳预压行程后，盖上气阀嘴帽。
- Locate the Schrader air valve on the shock and remove the air valve cap. 找到避震上的美嘴气阀，取下气阀帽。
- A Graphical Method for compensation of control Valve Performance. 控制阀特性补偿的图解方法。
- Control valve in an air system for setting volume and pressure. 为了保持流量和压力的空气系统的控制阀门。
- Ability of extension for remote control or flow control valve. 可扩充发展成远程控制，或流量控制设备。
- Manifolds can be added to a control valve sealing device. 可以给阀组加一个阀的密封控制装置。
- Unscrew the Allen screw in the middle of valve cap and lift up the cap just enough to pick up the old diaphragm. 旋松阀帽中间的内六角螺丝，并且提起阀帽，正好足够拿走旧阀膜。
- All parts inside adopt the stainless steel, and are installed on the valve cap, maintenance is convenient. 内部零件全部采用不锈钢制造，并且安装在阀盖上，维修保养极为方便。
- Do not overheat cylinders to increase pressure or discharge rate. NEVER insert an object (e.g., wrench, screwdriver, pry bar, etc.) into valve cap openings. 禁止使钢瓶过热来增加压力或流速。禁止把物体（如扳手、螺丝起子、撬杆等）插入阀门帽地开口处。
- Close the gas control valve, and clean the test cup and slide at once. 关闭气体控制阀,并立即清洗试样杯及盖子。
- NEVER insert an object (e.g., wrench, screwdriver, pry bar, etc.) into valve cap openings. Doing so may damage the valve causing it to leak. 禁止把物体（如扳手、螺丝起子、撬杆等）插入阀门帽的开口处。这样做可能损伤阀门，导致泄漏。
- Oxygen control valves consist of valve, actuator and accessories. 氧气调节阀由阀门;气动执行机构及附件组成.
- NEVER insert an object (e. G., Wrench, screwdriver, pry bar, etc.) Into valve cap openings. Doing so may damage the valve causing it to leak. 禁止把物体(如扳手、螺丝起子、撬杆等)插入阀门帽的开口处。这样做可能损伤阀门,导致泄漏。
- Continuous severe throttling applications may require a control valve. 如果需要持续性的节流应用，则可能需要配置控制阀。
