您要查找的是不是：
- continuous extrusion forming (CONFORM) CONFORM连续挤压技术
- Study of agile manufacturing theory and technology's application in research of continuous extrusion forming technology 敏捷制造技术在连续挤压技术工程研究开发中的应用探讨
- Study on the Influence of the Wheel Angular Velocity on the Continuous Extrusion Forming Process 连续挤压成形过程中挤压轮速度的影响
- Keywords spread outlet of a shoe;big flakiness ratio;continuous extrusion forming;numerical simulation; 靴座扩展出口宽度;大宽厚比;连续挤压;数值模拟;
- Research on the Seal of Main Axis of Hydraulic Cylinder with Ultra-high Pressure in Continuous Extrusion Forming Machine 连续挤压机主轴轴向液压缸超高压密封研究
- continuous extrusion forming 连续挤压
- Lampshade is in extrusion forming with high purity aluminum. 灯罩采用高纯度铝材挤压成型,反光效率高,不会脱色;
- Continuous extrusion technology and its die structure have been determined via stress analysis in ex-trusion forming and characteristics of material itself,with satisfactory effect in practical use. 通过挤压成形的应力分析,确定了连续挤压工艺及其挤压模结构,在实际应用中取得了令人满意的效果。
- The influencing factors and technical problems of continuous extrusion of microcellular plastic foams are explained. 阐述了塑料微孔发泡连续挤出成型中的众多技术难点和影响因素。
- This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elasto-plastic finite element method. 采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
- A set of machine using in strengthening the copper strip in the continuous extrusion process is developed in this paper. 本文设计了一台专门用于对连续挤压生产铜扁线进行强化的智能控制的强化装置。
- Therefore, the extrusion forming can be guided by the microstructure evolution law of the materials, such as the dislocation evolution of the ECAP. 因此，考虑等径角挤压过程中的位错演化等材料微观组织演化规律，对材料的实际挤压成形有指导作用。
- By the means of the continuous extrusion process aluminum clads steel core, and then the steel core clad with aluminum is drawn into a finish product. 针对连续挤压包覆工艺,给出了变形温度、变形速度、钢线预热温度、钢线速度和钢线张力等工艺参数的确定原则,提出了各工艺参数的控制范围。
- The microstructure for copper strip produced by traditional drawing anneals method and continuous extrusion method are analyzed. 分析了传统拉拔退火法和连续挤压法生产铜扁线的组织。
- By the means of the continuous extrusion process aluminum clads steel core,and then the steel core clad with aluminum is drawn into a finish product. 针对连续挤压包覆工艺，给出了变形温度、变形速度、钢线预热温度、钢线速度和钢线张力等工艺参数的确定原则，提出了各工艺参数的控制范围。
- Extrusion forming with aluminum alloy. Solid structure. Not easy to deform. Surface processed with static coating. Light angle adjustment function. Bevel design. AR70 illuminant. 采用铝合金挤压成型结构稳定,不易变形,表面静电喷涂处理;可根据需要调整照射角度；斜边设计AR70光源;适用于商业场所，酒店，展厅，精品店，家庭等照明。
- The development status of continuous extrusion processing technology of microcellular plastics with supercritical CO2 fluid as foaming agent was rev... 综述了国内外超临界CO2辅助微孔塑料连续挤出加工技术的发展状况,提出了今后的研究方向。
- In order to find a method to reveal the deforming rnles of the viscoplastic extrusion forming such as the isothermal extrusion and superplastic extrusion etc. 为了寻求一种能全面揭示象等温和超塑性这类粘塑性复合挤压成形变形规律的方法，采用刚一粘塑性有限元对常温具有粘塑性行为的工业纯铅复合挤压进行了数值模拟。
- Through comparing it shows that continuous extrusion method is a better method of producing copper strip than conditional drawing anneals method. 通过比较,得出连续挤压法是一种优于传统拉拔退火方法的铜扁线生产方法。
- This paper is an introduction to the melten material stacking forming technology.The extrusion forming and spraying forming is compared.The features and applications is gaven out. 介绍了熔融材料堆积成形技术，对熔融挤出堆积成形和熔融喷射堆积成形进行了对比，讨论了这一成形技术的特点和应用领域。
