您要查找的是不是：
- A set of machine using in strengthening the copper strip in the continuous extrusion process is developed in this paper. 本文设计了一台专门用于对连续挤压生产铜扁线进行强化的智能控制的强化装置。
- By the means of the continuous extrusion process aluminum clads steel core, and then the steel core clad with aluminum is drawn into a finish product. 针对连续挤压包覆工艺,给出了变形温度、变形速度、钢线预热温度、钢线速度和钢线张力等工艺参数的确定原则,提出了各工艺参数的控制范围。
- By the means of the continuous extrusion process aluminum clads steel core,and then the steel core clad with aluminum is drawn into a finish product. 针对连续挤压包覆工艺，给出了变形温度、变形速度、钢线预热温度、钢线速度和钢线张力等工艺参数的确定原则，提出了各工艺参数的控制范围。
- The development status of continuous extrusion processing technology of microcellular plastics with supercritical CO2 fluid as foaming agent was rev... 综述了国内外超临界CO2辅助微孔塑料连续挤出加工技术的发展状况,提出了今后的研究方向。
- Abstract: At present,in continuous extrusion processing of micro-cellular plastics,the two pressure drop cell nucleation apparatus of the nozzle and gear pump are used. 文摘:在连续微孔挤出加工中，当今采用喷嘴和齿轮泵两种快速压降成核装置。
- At present,in continuous extrusion processing of micro-cellular plastics,the two pressure drop cell nucleation apparatus of the nozzle and gear pump are used. 在连续微孔挤出加工中，当今采用喷嘴和齿轮泵两种快速压降成核装置。
- Features of Copper and Aluminum Continuous Extrusion Process and Industrial Application 铜、铝连续挤压技术特点及工业应用
- Die Change for Continuous Production of Adjacent Sizes of Insulated Conductors without Shutdown-Analysis of a New Continuous Extrusion Process 相邻规格导线不停车换模具连续挤制新工艺的浅析
- continuous extrusion process 连续挤压法
- Continuously improve the extrusion process capability with quality team. 和质量组成员一起不断地改进注射成型工艺性能。
- According to the viscoplasticity of the polytetrafluoroethylene (PTFE), the fluctuation in the process of extrusion becomes smaller and smaller, and realize continuous extrusion finally. 与传统液压式柱塞挤出机相比，具有冲压频率高，熔融塑化效果好，产品质量好，设备和工艺过程简单等特点。
- Knowledge of Polymer or ceramics extrusion process and equipment is highly desired. 具有塑料或陶瓷挤出工艺和设备知识。
- Transformation of metal from slug shape to tube shape by the impact extrusion process does mot involve any assembly of parts in the fabrication of collapsible tubes. 在制作(装)膏状物小(金属)管过程中，将条状(或是块状)的金属通过冷挤压转化为管状的工序并不包含任何零件的装配。
- The influencing factors and technical problems of continuous extrusion of microcellular plastic foams are explained. 阐述了塑料微孔发泡连续挤出成型中的众多技术难点和影响因素。
- The force-feed lubrication method is used for drawing aluminum-clad steel fabricated by continuos extrusion process. 选用连续挤压包覆法生产的铝包钢丝毛坯，采用强制润滑拉拔技术进行拉拔试验研究。
- The results of numerical simulation show that the extrusion force increases laxly at first step of extrusion process. 模拟结果表明： 挤压初期为压实阶段， 挤压力增加缓慢；
- The microstructure for copper strip produced by traditional drawing anneals method and continuous extrusion method are analyzed. 分析了传统拉拔退火法和连续挤压法生产铜扁线的组织。
- The methodology presented to conduct the upper bound analysis of thixotropic extrusion process of semi-solid metal. 运用半固态金属触变塑性成形上限法,对半固态金属触变挤压过程进行了上限分析。
- Through comparing it shows that continuous extrusion method is a better method of producing copper strip than conditional drawing anneals method. 通过比较,得出连续挤压法是一种优于传统拉拔退火方法的铜扁线生产方法。
- The non-mandrel roll extrusion process of shaped tube was simulated using nonlinear FEM software. 采用非线性有限元数值模拟与实验的方法对异型管双道次无芯棒辊挤成型过程进行了研究。
