您要查找的是不是：
- The contact pressure distribution and the shape of contact area in vertical state and camber state of tire are measured by pressure sensitive films, respectively. 实时记录了试验中轮胎受力与变形关系,并采用压力敏感膜测量了轮胎在垂直状态及侧倾状态接地区域内的压力分布状况。
- In order to make the camber design easier and keep contact pressure equal along rolls, we shall assume the pressure distribution to be quadratic along the width and the marginal deformation to be planar. 摘要为了使中厚板轧机辊型设计快捷且保持辊间各点接触压力相等，利用了压力沿板宽方向呈二次分布、板边缘处变形为平面变形的计算处理，从而使辊型设计更为方便。
- Tire contact pressure distribution 轮胎接地压力
- During the modern longitudinal seam welded pipe production, the contacting pressure distribution between the roller and pipe is a very important parameter. 在现代的直缝焊管生产中,轧辊与管坯间的接触压力分布是一个非常重要的参数。
- Measuring Tire Contact Pressure Distribution of Light Vehicle 轻型货车轮胎接地压力分布实测
- Influence of Contact Pressure Distribution of Amphibious Tracklayer to Adhesive Force under NonLinear Cutting Model 非线性剪切模型下履带车辆接地比压分布对附着力的影响
- Simulated calculation and production experiment showed that contact pressure distribution between rolls is evened; 研究方法不仅为支承辊辊型的设计与改造提供了理论依据，且优化辊型本身也具有进一步的推广实用价值。
- contact pressure distribution 接触压强分布
- Contact pressure increase by 1.5 - 5 with same stems and yokes. 即使采用相同的阀杆和轭架;接触压力也能够增加1.;5至5倍。
- Establishment of the Longitudinal Seam Welded Pipe Forming Roller Contacting Pressure Distribution Model 直缝焊管成型机轧辊接触压力分布数学模型的建立
- The application results show that the distribution of roll contact pressure was meliorated, and the life of the backup roll was improved. 结果表明，优化后的辊型曲线改善了辊间压力的分布情况，降低了轧制末期工作辊边部对支撑辊的磨损，提高了支撑辊轧制质量。
- The contact pressure and its distribution, the load sharing between piers and the raft are monitored by the installed earth pressure cells at pier-soil and raft-soil interfaces. 根据基底下埋设土压力盒的观测结果,研究了墩-筏基础的工作机理;明确了基底压力及分布;分析了墩与筏基的荷载分配比。
- The method of force analysis of the reducer is proposed on the basis of a supposition of the distribution of contact pressure between the push rod roller and the gear rack. 介绍了这种减速器的结构和工作原理，并根据变形分析对齿条与推杆滚子间的接触压力分布做了假设。
- Metal lacing eyelets for optimum fastening and pressure distribution. 最好加速和减压的金属网状小孔。
- This curvature of the flow field alters the pressure distribution and the aerodynamic forces from their values in translational flight. 流场的弯曲使压力分布和空气动力与直线飞行时的值相比发生了变化。
- The perfect camber design can be obtained by introducing the center/side ratio concept of contact pressure and choosing proper ratio. 同时引入辊间接触压力的中、边部比值概念并作合理选择，使设计出的辊型更加完善。
- Marc FEM software is applied to simulate the forming regulation of swinging die method,and study the stress-strain field in swinging die method,pressure distribution on contact surface and flow of metal. 利用marc有限元软件对摆动辗压成形过程进行数值模拟,从而了解摆辗过程中摆辗件应力应变场以及接触表面区域的压力分布和金属流动情况。
- The calculating formulas related the residual contact pressures to hydroform... 结果表明该装置结构及其计算方法适于工程应用。
- In addition, the effect of startup pressure gradient of Bingham fluid in stratum pressure distribution are analyzed. 分析了宾汉流体的启动压力梯度对地层压力分布的影响。
- The high contact pressure and the choice of different electrical contact materials enable high currents to be switched reliably. 高接点压力和选择不同的电接点材料能可靠地控制大电流。
