您要查找的是不是:
- connection control protocol 连接控制协议
- The PPP link control protocol terminated. PPP链接控制协议已终止。
- E-NNI connect setup signaling control protocol is important to implement interoperable optical network. E-NNI连接建立的信令控制协议是自动交换光网络中域间网络互联互通的关键协议之一。
- The remote computer terminated the control protocol. 远程计算机终止了控制协议。
- It is a control protocol for multimedia streaming over IP networks. 它是在IP网络上传输多媒体流的控制协议。
- Compared with the conventional SCCP(Signaling Connection Control Part) of SS7 system and RTP(Real-time Transport Protocol) of VoIP system,the proposed protocol is easier to implement. Moreover,it can reduce the system cost without performance lost. 相对于传统SS7系统的SC-CP(Signaling Connection Control Part)和IP电话系统的RTP(Real-time Transport Protocol);BSTP协议更易于实现;并可在保证性能的前提下极大地降低系统成本.
- In according to standard specification, this paper puts forward a kind method of OPNET processing state which is used to analyze standard E-NNI connect setup signaling control protocol, to realize S?(sreq) state protocol modeling language. 基于OPNET进程状态实现E-NNI连接建立的信令控制协议状态,符合标准化的E-NNI连接建立的信令控制协议。 这种状态功能方法可以在VxWorks平台下实现实际需要的标准协议。
- Listed by IAPMO, Approved by the Foundation for Cross Connection Control &Hydraulic Research at USC. 通过IAPMO和位于美国南加州大学内的美国交叉连接控制和水力研究基金会的认证。
- No PPP control protocols configured. 没有PPP控制协议被配置。
- Datagram congestion control protocol(DCCP)is a new transport protocol put forward by IETF. 数据报拥塞控制协议(DCCP)是IETF提出的一种新的传输层协议。
- The PPP control protocol for this network protocol is not available on the server. 在该服务器上PPP控制协议对于整个网络协议是不可用的。
- Meets requirements of ASSE 1056, IAPMO, Approved by the Foundation for Cross Connection Control &Hydraulic Research at USC. 满足美国卫生工程师协会(ASSE),IAPMO和位于美国南加州大学内的美国交叉连接控制和水力研究基金会的标准。
- The RTP media channels will still use Transmission Control Protocol (TCP), which is not encrypted. RTP媒体通道将仍然使用不加密的传输控制协议(TCP)。
- However, the media channels that use RTP will still use Transmission Control Protocol (TCP), which is unsecured. 但是,使用RTP的媒体通道仍将使用传输控制协议(TCP),而后者是不安全的。
- This Recommendation contains a detailed set of tests for the Signalling System No. 7 Signalling Connection Control Part(SCCP). 本建议包含了一组详细的对七号信令系统信令接续控制部分(SCCP)的测试。
- Specifies the control protocol used in establishing a serial port communication for a SerialPort object. 指定为SerialPort对象建立串行端口通信时使用的控制协议。
- To connect control computer with PLC and realize supervisal, a real time supervisal control software of water supply system is developed. 计算机井群测控系统由工控机、可编程控制器(PLC)、软启动器,水泵电机组以及各种传感器组成。
- Specifies the control protocol used in establishing a serial port communication for a. 对象建立串行端口通信时使用的控制协议。
- Real-time Transport Control Protocol (RTCP) is a sister protocol of the Real-time Transport Protocol (RTP). 实时传输控制协议(Real-time Transport Control Protocol或RTP Control Protocol或简写RTCP)是实时传输协议(RTP)的一个姐妹协议。
- The primary function of the Signaling Connection Control Part (SCCP),the transport layer) is to support the transfer of TCAP,OMAP and MAP data between network nodes. 信令连接控制部分 (SCCP),传输层,最主要的一个功能就是支持 TCAP、OMAP 和 MAP 数据在网络节点间的传输。