您要查找的是不是：
- Powder treatment of kiln firing mister and compression molding. 窑业喷雾塔及压制成型制程之粉尘处理。
- compression molding powder [化] 压塑粉
- Compression molding distributes the EVA foam within the midsole to areas that need the most cushioning. 压缩注塑可以将中底内的EVA泡沫分布在需要最多缓冲的区域。
- Glycidyl methacrylate(GMA) modified soy protein isolate(SPI) plastics were prepared via the compression molding. 用模压的方法制备了甲基丙烯酸缩水甘油酯(GMA)改性大豆分离蛋白质(SPI)塑料。
- The foamed materials were prepared by compression molding, and antistatic agent was applied to polyolefine. 在聚烯烃中添加抗静电剂,采用模压法制备了发泡材料。
- They can be divided into two classes, those which are castable and those which must be processed by extrusion or compression molding. 它们可分为两类：可浇铸的和必须由挤压或模压加工的。
- Extra-Lok closures are manufactured using Alcoa CSI's advanced compression molding technology, ensuring superior performance and quality. Extra-Lok瓶盖使用Alcoa CSI的先进压模技术制造,它能确保超强的性能及优异的质量。
- C+BN skeleton particles can decrease viscosity,melting temperature,melting rate and crystallizing temperature of the mold powder. C+BN作为骨架粒子可以使保护渣的粘度减小、熔化温度降低、熔化速度降低、结晶温度降低.
- Polyphenylene sulfide(PPS) composites filled with Polytetrafluoroethylene(PTFE) and kaolin nanoparticles were prepared by compression molding. 通过模压的方法制备了聚四氟乙烯(PTFE)和纳米高岭土填充的聚苯硫醚(PPS)复合材料。
- A new method of using the time of last inflection of burning curve of mold powder as the index of the melting speed is developed. 提出了以保护渣烧损曲线最后一个拐点对应的时间来表征其熔化速度的新方法。
- Chen, C.M., Young, W.B., (2000). “The Effects of Compression Pressure on Injection Compression Molding”, Intern. Polymer Process, 15(2), 176. 廖俊郎(2000)“射出压缩成型对微型制品光学品质之影响研究”，国立云林科技大学机械工程研究所硕士论文。
- They can be divided into two classes, those which are castable and those which must be processed by extrusion or compression molding . 它们可分为两类：可浇铸的和必须由挤压或模压加工的。
- Through optimizing the oscillation parameters and mold powder properties, the hook mark defect of billet was eliminated and the surface quality improved obviously. 通过优化结晶器振动参数和改善保护渣性能,消除了铸坯的钩形振痕等缺陷,改善了表面质量。
- The influences of contacting pressure, PF content and compression molding parameters on the contact resistance were investigated. 考察了接触压力、PF树脂含量及模压工艺条件对接触电阻的影响。
- Based on pointmodel between copper plate and mold powder particle and the adhesion theory between friction and copper plate wear,the wearing extent was analyzed. 通过对结晶器铜板与保护渣颗粒微元体接触点模型分析,并结合摩擦与磨损黏附理论分析实际生产中铜板受磨损的影响因素。
- Based on the slaking curve and thermo-gravimetric curve of calcium lime, the rational cold compression molding techniques of calcium carbide were given. 摘要通过分析生石灰的消化曲线和热失重曲线，提出了合理的电石成型工艺。
- Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology. 采用廉价的秸秆为增强材料,以淀粉为基体材料,通过模压成型制备出一次性可生物降解花盆。
- Epoxy resin was modified with liquid nitrile-butadiene rubber(LNBR),and unidirectional boron fiber/epoxy resin(Bf/epoxy) composites were fabricated with compression molding. 对环氧树脂进行液体丁腈橡胶改性,并采用缠绕无纬布层压成型工艺制备了硼纤维/环氧单向复合材料。
- The molding powder(CL-18 :F2311=98.5 : 1.5) was made using fine CL-18 particles and the initiation properties of the molding powder was tested. The results show that CL-18 was an explosive easy to be detonated with low sensitivity. 利用细颗粒CL-18制备了造型粉(CL-18:F2311=98.;5:1
- Sawdust, straw compression molding takes a lot of pressure, in the same granulation, briquetting, the system bar equipment, roller parts are the center of the device components. 木屑、秸秆压缩成型需要很大的压力，在同类制粒、压块、制棒设备中，压轮部件是整个设备的中心部件。
