您要查找的是不是：
- cold plasma polymerization 低温等离子体聚合
- The processing conditions employed in the technique of plasma polymerization , the ageing of the polymer films and the corrosion of metal substrates are the main factors which affect the heat transfer performance and the life time of DWC. 等离子体聚合工艺条件、基底金属发生腐蚀、聚合薄膜老化是影响滴状冷凝传热及寿命的主要因素。
- There are three ways using plasma technology to modify the surface properties of polymer materials,which are plasma surface treatment,plasma polymerization and plasma graft copolymerization. 运用等离子体技术改变高分子材料的表面性质的方法主要有三类:等离子体处理、等离子体聚合和等离子体接枝聚合。
- The plasma polymerization for n Butylamine was discribed in this paper. 采取等离子体方法，首次将正丁胺单体聚合成聚正丁胺薄膜。
- Grill, A., 1994, “Cold plasma in materials fabrication “, IEEE PRIES. 张癸森,2001,”以低温电浆提升吸附材表面性质”,私立中原大学硕士论文。
- According to the analytical results,the mechanism of plasma polymerization of a-pinene is suggested. 根据分析结果，提出a-蒎烯等离子体聚合机理是自由基聚合反应机理。
- The coating nano-metal materials are prepared by physical adsorption, surface deposition, arc discharge, plasma polymerization, laser CVD and emulsion polymerization. 其制备方法主要有物理吸附法、表面沉积法、电弧放电法、等离子体聚合法、激光化学气相沉积法、乳液聚合法等。
- In this paper the kinetics of methane cracked and converted to C2 hydrocarbons in cold plasma was investigated. 本论文着重探讨冷等离子体裂解甲烷制C2+烃反应的动力学过程。
- Abstract： The plasma polymerization of aniline in a capacitivity coupled of glow discharge was described and suitable conditions for plasma polymerization were found. 摘要： 应用外部电容耦合式等离子体聚合装置,研究了苯胺等离子体聚合规律,找到了最佳的聚合条件。
- A.MALID SARMADI.T.H.YING.and FERENCZ DENES.Surface Modification of Pdyprpylene Fabrics by Acrylonitile Cold Plasma Textile Res.J.,1993(12):697. 裴晋昌.;低温等离子体对高分子材料表面的改性
- Application of Cold Plasma Technology in fiber-reinforced Composite Materials Kudinov V. V.;Abdullin I. Sh.;Korneeva N. V. 磁共振全心冠状动脉成像技术的初步研究何建勋;孙翀鹏;曾庆思;邓宇;李新春
- Influence of Plasma Polymerization on Polymer Deposition Rate 等离子体聚合工艺对聚合沉积速率的影响
- This paper studies moisture properties of two kinds of epoxy resins composite materials of Kevlar fiber which is untreated and treated by means of cold plasma. 本文研究了以冷等离子体处理及未经处理的两种芳纶纤维增强环氧树脂复合材料的吸湿行为。
- Norikazu, K., Yamada, H., Yajima, T. and Sugiyama, K., Surface properties of activated carbon treated by cold plasma heating, Thin Solid Films, Vol.515, pp. 4192-4196, 2007. 黄龙泰，以稻壳和花生壳制备高表面积之活性碳与其应用，国立台湾科技大学化学工程系，硕士论文，2001。
- In this paper, cold plasma technology is used to treat the surface of carbon fibers braided by PET and the surface microstructure of the carbon fiber is analyzed by AFM. 本文作者采用冷等离子体技术对PET缝编碳纤维织物进行表面处理,并采用AFM对处理前后的碳纤维表面形貌进行了分析。
- The dropwise condensation (DWC) of water vapour has been achieved on the ultra thin poly(HFP) film coated on copper tube surfaces which has been prepared by the technique of plasma polymerization. 采用等离子体聚合技术制备了铜基聚六氟丙烯薄膜，并实现了水蒸汽的滴状冷凝。
- A coating on NiTi alloys surfaces was prepared under diethylene glycol dimethyl ether (diglyme) microwave cold plasma in electron cyclotron resonance conditions. 在微波电子回旋共振低温等离子体条件下，用二乙二醇二甲醚为试剂对镍钛合金进行表面改性。
- In the paper, the law of plasma polymerization of dimethylaniline in a capacitively coupled of glow discharge was described and suitable conditions for plasma polymerization were found. 应用外部电容耦合式等离子体聚合装置，研究了二甲基苯胺等离子体聚合规律，找到了最佳的聚合条件。
- The Jo plasma torus consists chiefly of high dense cold plasma a mechanism is thus needed for cold ions to enter Jupiter's atmosphere and trigger the emissions of Io's wake. 木卫-等离子体环主要由高密度的冷等离子体组成，因此还需要一个能使冷离子离开木卫-等离于体环进入木星大气层的机制，使它能够引发木卫-尾迹极光的发射。
- The PET fibers are treated by cold plasma technology and the elemental composition and the type of functional groups of the surface of PET was analyzed by ESCA. 采用冷等离子体技术处理涤纶纤维,利用ESCA分析了冷等离子体处理前后的纤维表面元素组成、官能团类型的变化。
