您要查找的是不是：
- And the cold flow properties of diesel fuel were studied by using the technology of photomicrography and thermodynamics. 利用光学显微技术和热分析技术研究了柴油的低温流动性能。
- The effect of three commercial cold flow improvers (T1, T2 and T3) on the cold flow property of two FCC diesel fuels (A and B) was studied. 摘要 考察了三种市售柴油低温流动性改进剂（T1,T2,T3）对两种催化裂化柴油(柴油A、柴油B)的低温流动性的改善效果。
- Advances in research of cold flow properties of diesel fuel 柴油低温流动性能研究进展
- Cold Flow Properties of Diesel with Cold Flow Improver 柴油低温流动性能的研究
- cold flow properties 低温流动性
- Higher melting point resin. Used in cold curing lacquers suitable for improving the flow properties and chemical resistance of epoxy powder coating. 高熔点树脂,用于低温固化涂料,增加粉状涂料的流动性和抗化学腐蚀能力。
- Some of the other properties to be considered are leak integrity, permeation, cold flow, off-gassing, particle shedding, and cost. 要考虑的一些其它性质是泄露完整性、渗透、冷变形、排气、颗粒脱落和成本。
- Higher melting point resin. Used in cold curing lacquers suitable for improving the flow properties and chemical resistance of epoxy powder coatings. 高熔点树脂,用于提高粉状涂料的流动性和抗化学腐蚀能力。
- Good flow property and uniformity. 良好的流动性和均匀性。
- Its hardness and flow properties can be improved by adding softener. 软化剂的加入可以改善其硬度及加工流动性。
- cold flow property 低温流动性
- When the Teflon is squeezed, it responds by “cold flowing. 当特氟纶受到挤压时，它的反应是“冷变形”。
- Recommended in hybrid systems with saturated polyesters., It has very good flow properties. 建议与深颜色树脂混合,提高流动性。
- The diaphragms may become permanently inverted and the elastomeric stem tip can cold flow down the throat of the valve. 横膈膜会永久性的翻转，人造橡胶阀杆尖端会冷变形到阀门的喉管处。
- Measurement of Flow Properties of Lubricating Greases at High Temperatures, Method for (05. 高温下润滑脂的流量特性的测量方法(05。
- Diesel engine operators all over the world benefit from the cold flow improver capabilities of Bell's DEE-ZOL PLUS with Anti-Gel. 同时确保了燃料的流动，并有效防止燃油滤清器堵塞。全球柴油机的操作员都得益于带有抗凝胶功能的贝尔DEE-ZOL PLUS的冷流改进剂。
- The influences of die radius, load and temperature on the flow properties of FEP melt were investigated by using a melt flow indexer. 应用熔体流动速率仪考察了口模半径、载荷及温度对聚全氟乙丙烯(FEP)流动性能的影响。
- For most specialty gases, CTFE is recommended over PTFE because it is less permeable to oxygen and moisture, and evidences less cold flow. 对于大多数特种气体，推荐使用CTFE，而不是PTFE，这是因为CTFE对氧气和水蒸汽的渗透性更差，冷变形也较小。
- The CCD image measurement and data processing system was used to study two-phase flow properties of multi-pipe circulating fluidized bed. 利用CCD图像测量与数据处理系统对多管液固循环流化床换热器中的两相流动特性进行了研究。
- Shear is one of the major factors influencing flow properties of waxy crude beneficiated with the pour-point depressants(PPD). 剪切作用是影响加剂原油流动性的主要因素之一。
