您要查找的是不是：
- Cold Metal Transfer (CMT) welding technology is an innovation based on the MIG/MIG welding processes in Fronius in resent years. It realises the process between wire feeding and droplet transfer with digital harmonization. Fronius公司CMT(Cold Metal Transfer)冷金属过渡技术是在MIG/MAG焊基础上开发的一种革新技术,第一次将送丝运动与熔滴过渡过程进行数字化协调。
- Don't touch that cold metal with bare hands, or your skin will stick to it. 不要用手直接摸那块冰冷的金属，否则会沾掉你手上的皮。
- cold metal transfer 冷金属过渡
- Don't touch that cold metal with bare hands,or your skin will stick to it. 不要用手直接摸那块冰冷的金属，否则会沾掉你手上的皮。
- Don't touch that very cold metal with bare hands,or your skin will stick to it. 不要用光手去摸那很冷的金属，否则你的皮会粘在上面的。
- Mode of Metal Transfer for GMAW (Spray arc, short circuiting arc, etc. 金属过渡方式(射流或短路等)
- Inside his shirt he felt the cold metal of the gun resting against his naked skin. 衬衫里面，他感觉到那支枪冰冷的金属紧贴着他赤裸的皮肤。
- She even warms a spoon before feeding them by hand because She knows cold metal is uncomfortable for them to eat from. 师父甚至会在喂食它们之前,先将汤匙温热,因为她知道冰冷的金属会让鸟儿不舒服。
- Arc blow, plasma streaming, and metal transfer are some of the welding arc characteristics strongly influenced by the presence of the magnetic fields. 磁场的存在对于电弧偏吹、等离子体流以及金属过渡等基本的电弧的性能产生强烈的影响。
- The cold metal of his half cowl contrasted with red anger on the rest of his face. 他的脸上，一半是冰冷如铁的面罩，另一半是充血愤怒的皮肤，对比鲜明。
- Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding. 短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
- Chill. Place the coated glass on a level cold metal plate until the emulsion sets, then place in the dark to dry. 冷却：把涂抹了乳剂的玻璃放在水平的金属板上知道乳剂凝固，然后再把这些玻璃板放到无光的地方使其干燥。
- The results show that the metal transfer forms of high cellulose electrode contain spray transfer, explosive transfer and short circuiting transfer. 结果表明，高纤维素型焊条立向下焊时表现为混合过渡形态．有细颗粒和大颗粒喷射过渡，爆炸过渡，短路过渡。
- Quickly checking the left and right of her field of vision, she let the cold metal viewfinder come to rest lightly yet solidly against her eyebrow. 她迅速地顾盼了一下视野左右，冰冷的目镜轻轻地、稳稳地抵住了她的眉梢。
- The technology of numerical simulation for metal transfer in GMAW is one of the front and research hotspot in the weld filed, which has achieved great progress in recent years. 摘要熔化极气体保护焊熔滴过渡数值模拟作为焊接学科的前沿领域和研究的热点之一，近年来已经取得了较大的进展。
- It has been found out that the defect was caused by adopting the foundry method with a cold riser which actually acted as a cold metal bleeder. 业已查明,缺陷是由于采用冷冒口工艺所致,因为冷冒口实际上起排放冷铁液作用。
- High current MAG welding is an effective method to improve productivity.High-speed vidicon is used to study the effect of arc shapes and metal transfer on weld profiles. 采用高速摄像法对大电流MAG焊的电弧形态、熔滴过渡形式对焊缝成形的影响进行了研究。
- The realization of metal transfer controlling in MIG/MGA welding relies on the acquiring of high quality droplet signal with excellent adaptivity to transfer mode. 熔滴过渡控制的实现，取决于获得宽工艺适应性的熔滴过渡传感信号。
- Using high speed photography and ANALYSATOR HANNOVER, metal transfer modes of flux-cored wire were observed and analyzed.The reseach results are confirmed. 采用焊接过程的高速摄影技术和汉诺威焊接质量分析系统对药芯焊丝的熔滴过渡形态进行观察分析。
- This article illuminates the process and characteristic of double-wire MAG welding from requirements of welding machine,gas,metal transfer control and weld-ing process. 从其焊接设备的要求、保护气体以及其熔滴过渡控制、焊接过程等几个方面,详细介绍双丝MAG焊的工艺及其特点。
