您要查找的是不是：
- Clamping force equalization: same force to two workpieces in different size. 自动补偿机构：不同大小工件，可在同时夹紧，且夹持力相同。
- Size and grade specific cap bolts offer superior clamping force between the cap and base. 座罩螺栓有不同的尺寸和等级,在座罩和基础之间形成理想的夹持力。
- In using an injection moulding machine, it is best to use the minimal but adequate clamping force F. 使用注射成型机，最好使用最小同时充足的锁模力F。
- The two deices do clamping force measurement/control and caity pressure switchoer to holding pressure. 这两个装置就是锁紧力量测/控制装置和（射出）转保压的模腔压力转化装置。
- Choosing a PIMM simply on the basis of shot weight is too simplistic.Neither is clamping force alone sufficient. 仅仅基于射出重量去选择注塑机是不够的，同样的，仅考虑锁模力也不可以。
- Furthermore, a high clamping force compresses the toggles and the mould, and stretches the tiebars, reducing the fatigue lives of the toggle pins, the mould and the tiebars. 高锁模力对曲轴结构和模具产生挤压，对拉杆（控制开合模甚至锁模的四个大杆）产生拉伸，从而降低他们的疲劳寿命。
- An excessive clamping force distorts the mould and the mould cavity unnecessarily, affecting the precision of the moulded part. 过大的锁模力会使模具以及模腔产生不必要的变形，影响成型品的精度。
- This paper focus on simulating the KM toolholder taper interface positioning under different clamping force by using Finite-element Method. 针对KM刀柄锥面定位在不同夹紧力下进行有限元模拟,得到径向位移、接触应力、锥面间隙结果。
- Research results show that with application of Mucell,the 10% raw material can be saved,the injection pressure is decreased by 36.7%,the clamp forc... 研究结果表明:采用微孔发泡注射成型工艺可以节省原材料10%25;注射压力降低了36.;7%25;锁模力降低了60
- Twoprocess mode can be ed, single or continuous. The clamping force of hold down device will in crease when cutting force increases. 两种使用模式给客户选购，单次或连续。另压片力会随着剪切力增加而自动调节。
- Its paper clamp presses tightly against the material to be cut by means of a high quality strong pull spring assembly and the clamping force can be adjusted readily. 压纸器是由优质强力拉簧组使其牢牢地压紧裁切物,压力大小调整方便。
- The mechanics models of metal-bands transmission concerning clamp force of pulley, axial force, thrust and tension is built based on Coulomb friction theory. 以库仑摩擦理论为基础，在考虑了带轮夹紧力、轴向力、挤推力和金属环张力的基础上，建立了金属带传动的力学模型。
- The alterable clamping force fixture can automatically adjust its clamping force to adapt to the cutting force to reduce the cutting deformation of machining system. 变夹紧力夹具能够适应切削力的变化,自动调整夹紧力的大小,以减少加工系统的切削变形。
- Insufficient clamping force gies rise to flash at the mould joint.Most PIMMs today use their clamping force (in tonnes) in their model name, e.g.ME125III. 锁模力不足会引起模具结合处的飞边，现在大多数注塑机都采用其锁模力（单位：吨）作为其型号名称，如：ME125III。
- The important factors influencing the screw backpressure, injection pressure, packing pressure and mold clamping force as well as their setting means are presented. 概述了影响注塑机螺杆背压、注塑压力、保压压力和锁模力的重要因素及其设定方法。
- By setting up force model of rolled stock in cutting area, function relation among clamping force, side clearance of cutting blade and side thrust is given out. 建立了轧件在剪切区的力学模型，给出了压板力、剪刃侧隙与侧推力的函数关系，并提出减小侧推力影响的对策。
- And a proper clamping force is found to be essential to assure the axial and radial orientation precisions of the HSK tooling system in high speed machining (HSM). 对HSK工具系统的定位精度进行了实验研究,揭示出夹紧力和刀柄锥面与主轴孔锥面之间阻力的相互依存关系及其对定位精度的影响。
- It can produce more clamping force by less motive power, and multiplying of force - increasing can be adjusted by the designer in according with the practice situation. 它可以用较少的原动力获得较大的夹紧力，其增力倍数据实际须要同设计者调整。
- It adopted new type collet chuck structure with high precision.It has the advantage of big clamping force, big deformation, production based on series and full specification. 铣夹头采用新型的弹簧夹头结构，精度高，具有夹紧力大，变形大，按系列生产，规格全等优点。
- Results form fabrication and experiments testify the feasibility and practicability of the presented micro-presented micro-gripper with clamping force sensing. 制作和试验结果验证了这种带力传感的微夹持器的可行性和实用性。
