您要查找的是不是：
- cladding diameter tolerance 包层直径公差
- The eccentric diameter tolerance which is h9. 偏心直径公差为h9。
- The cam-bores may present a roundness error within the diameter tolerance, so the most significant diameter value for the shim/tappet thickness determination is the one along the valve train axis. 凸轮孔可能会出现直径公差范围内的误差，所以决定垫片/凸子厚度的最大直径值应位于气阀机构的轴部。
- The shank diameter tolerance which is h7, and, 芯柱体直径公差为h7
- Diameter tolerance of steel wire 钢丝直径
- Mini Rods-Outer Diameter Tolerance Fixed Type 小口径棒材-外径公差选择型
- For vessels fabricated from pipes, diameter tolerances shall be in accordance with the relevant pipe specification. 用管道制作的容器，直径的容许偏差应符合相关的管道规范。
- Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments 用激光测量仪测量光纤包层直径
- The diameter tolerances for these bearings deviate from the Normal tolerances for the other rolling bearings, see section "Tolerances". 这些轴承的公差值偏离其他滚动轴承的普通公差,参见"公差"一节。
- Diameter Tolerance, Ovality and Average Decarburized Layer Depth 直径公差,偏圆度及脱碳层的平均深度
- The knight was completely clad in armor. 那位骑士全身披挂盔甲。
- The bore and outside diameter tolerances of SKF single and double direction tapered roller thrust bearings are produced, with very few exceptions, with Normal tolerances to ISO 199-1979. SKF单向和双向圆锥滚子推力轴承的孔径和外径公差除少数例外,均按照ISO 199-1979标准的普通级公差生产。
- The old lady was clad in a fur coat. 这位老妇人衣著皮裘。
- This lens can magnify 20 diameter. 这个透镜能放大20倍。
- Mathematical analysis for the diameter tolerance of spiral welded pipe 螺旋焊管直径公差的数学分析
- This has gone beyond the gauge of her tolerance. 这已超出她的忍受范围。
- The diameter of the tree-trunk is about 2 meters. 这树干的直径大约是2米。
- The woods on the mountain sides were clad in mist. 高山坡上的小树林都笼罩在一片薄雾中。
- The axis of a circle is its diameter. 圆的轴线是其直径。
- Measure the diameter of this circle. 量一下这圆的直径。
