您要查找的是不是：
- The gas flow field in the vortex quick separation system with a inner cylinder for fluid catalytic cracking gas disengaging was measured by an intelligent five-hole probe. 用智能型五孔探针对催化裂化沉降器带筒状物的旋流快分系统(在旋流头上插入了一个筒状物)内的气体流场进行了测试。
- This paper presents the hydrofining process of coking and catalytic cracking gases The refined mixture refinery gas and naphtha used as ammonia production feedstocks with considerably lower cost is also presented. 介绍催化和焦化混合干气加氢精制制氨工艺，干气与石脑油双原料制氨在大化肥装置上成功应用的情况。
- It is known as catalytic cracking. 这就是所谓的催化裂化。
- catalytic cracking gas 催化裂解富气
- Extraction of ethylene from catalytic cracking dry gas is an efficient means to reduce waste and increase the output of ethylene. 目前国内乙烯资源短缺,从催化裂化干气中提取乙烯是减少浪费、提高乙烯产量的有效途径。
- The effects of catalyst composition and properties on yield distribution of catalytic cracking of coker gas oil containing feedstocks were studied. 探讨了以减压瓦斯油掺炼部分焦化蜡油为进料时催化剂组成及性能对催化裂化产品分布等的影响。
- Not only were there the gas solid two phase turbulent flows, but also there were heat transfer and cracking reaction in the commercial flow catalytic cracking(FCC) riser reactors. 工业催化裂化提升管反应器内既存在着气固两相的湍流流动，又存在着传热和裂化反应，而且这些过程是相互影响、高度耦合在一起的。
- The design of a waste heat boiler as well as methods concerning the ash deposit,abrasion and flue gas leakage for the petrochemistry s catalytic cracking process are introduced. 阐述了一台利用石化行业催化裂解装置废气的余热锅炉设计过程,重点介绍解决锅炉积灰、磨损和漏烟问题的方法。
- Fluidized bed processing was first used commercially in fluid catalytic cracking of crude oil in 1941. 早在1941年，流化床工艺过程就第一次以工业规模用于原油的流化催化裂化。
- The high efficiency steam stripping technology of catalytic cracking unit can efficiently decrease the coke yield, and mitigate the regenerator's load. 催化裂化装置高效汽提技术可有效降低焦炭产率,减轻再生器负荷。
- Fluid catalytic cracking(FCC) is one of the most important processes converting heavy oil to light oils. 流化催化裂化(FCC)是最重要的重质油轻质化过程之一。
- The effects of the compostion s of different catalytic stocks on catalytic cracking reaction was discussed. 讨论了不同催化原料油组成情况及其对催化裂化反应的影响。
- The Fluid Catalytic Cracking (FCC) is the major gasoline-producing process in refinery. FCC(流化催化裂化)是炼厂生产汽油的主要方法之一。
- The latest desulfurization technologies of Fluid Catalytic Cracking (FCC) gasoline are introduced. 介绍了国内外最新的流化催化裂化 (FCC)汽油的脱硫技术 .
- The mass fraction of n-butene in mixed C4 from catalytic cracking after etherized was approximately 40%. 醚化后的催化裂化混合C4中含有质量分数约为40%25的正丁烯,是生产丙烯的优质原料。
- Catalytic cracking of olefins features simplicity in operation and low cost,and should be developed in preference. 烯烃催化裂化技术具有操作简单和成本低廉等优势,应加快研究开发。
- This not only abbreviates catalytic cracking equipment, but also enhances the economical effects of refineries plant. 这样不仅缓和了催化装置的操作,而且可为炼油厂开发出新产品,创造经济效益。
- The cracking gas from oil is very different from the cracking gas from kerogen in components and carbon isotopes. 原油二次裂解生成的天然气与干酪根初次裂解生成的天然气在组分特征和碳同位素特征上存在明显的差异。
- Technologies and catalysts for catalytic cracking of olefins to propylene were reviewed. 综述了国内外烯烃催化裂化制丙烯主要工艺发展现状以及有关催化剂的研究。
- Taking solvent refining technique to produce rubber oil from furfural exaract oil and catalytic cracking heavy oil. 采用溶剂精制工艺处理糠醛抽出油、催化裂化重油(回炼油和油浆),用以生产橡胶用油。
