您要查找的是不是：
- capilary stiction 毛细黏附
- This paper studies the method of determine benzenes in waste water by capilary column GC. 摘要研究了用气相色谱毛细管柱分析水中苯系物的方法。
- The Casimir effect is not the only cause of stiction, but it is an important one. 卡西米尔效应不是这种阻力的唯一起因，却是幕后主参。
- The stiction and friction influencing the yield and reliability of MEMS are reviewed in this paper. 文章评述了影响微电子机械系统 (MEMS)成品率和可靠性的粘合力和摩擦力问题。
- This suggests that if you designed microelectronic components carefully, you could reduce stiction. 这就意味着如果你的设计足够小心谨慎，那么这一部分的表面阻力是完全可以避免的。
- The presence of nonlinearities,such as stiction,and deadband in a control valve limits the control loop performance. 控制阀门中非线性的存在,比如迟滞、死区等,限制了控制回路的性能;
- The presence of nonlinearities, such as stiction, and deadband in a control valve limits the control loop performance. 摘要控制阀门中非线性的存在，比如迟滞、死区等，限制了控制回路的性能；
- About 30% of the control loops oscillation are due to valve problems, and stiction is the most commonly found valve problem in the process industry. 大约30%25的控制回路振荡是由于阀门的问题，而迟滞是过程工业中所发现的最普遍的阀门问题；
- The stiction problem is observed while releasing the microstructure, which really affects the functionality of the switches. 过大的残留应力，也使得结构在不连续处造成断裂现象，皆会使得良率大幅下降。
- This method of checking sag and taking stiction into account also allows you to check the drag of the linkage and seals. 这个把摩擦考虑进去的检查下沉的方法还能使你检测连接件和油封的阻碍。
- About 30% of the control loops oscillation are due to valve problems,and stiction is the most commonly found valve problem in the process industry. 大约30%25的控制回路振荡是由于阀门的问题,而迟滞是过程工业中所发现的最普遍的阀门问题;
- Friction, wear and stiction problems have been the important factors affecting the performance and reliability of microelectromechanical systems (MEMS). 摩擦、磨损和粘附问题已经成为影响微机电系统(Microelectromechanical Systems,MEMS)性能和可靠性的主要因素。
- That would knock the problem of stiction firmly on the head and, according to Dr Capasso, would open up the possibility of making things like frictionless ball-bearings. 这就使从根源上解决表面阻力问题成为可能。而根据Capasso博士的断言，这更敲开了制造诸如无摩擦轴承在内的理想设备的大门。
- Pneumatic control valves stiction is very common in process industry.A big fluctuation of process will be caused by stiction and productivity will also be lowered. 气动阀门的静摩擦现象在工业过程的控制中非常普遍，易引起控制系统的波动，从而影响生产的正常进行。
- Several test conditions on viscosity number determination of polyvinyl chloride resin dilute solution were introduced,such as test temperature,fluidmeter capilary diameter,solvent concentration. 聚氯乙烯树脂稀溶液粘数是聚氯乙烯树脂的一项重要指标,它的高低决定着产品的不同用途。
- The result shows that distribution of displacement and stress of the cantilever will theoretically benefit to the prediction of stiction or fracture ... 其结果可为预测悬臂梁的断裂失效和粘附失效提供理论基础,为悬臂梁的设计提供参考。
- In the paper the neutral flavor constituents of tobacco extracted by dichloromethane were separated using an improved gas co-distillation method and were analysed by the capilary gas chromatography. 本文使用一种改进的顶空共蒸馏技术与毛细管气相色谱法分离分析了烟草的中性香味成分。
- Concentration process of ionic sample in capilary electrochromatography (CEC) could be carried out through association of separation mechanism of HPLC and capillary electrophoresis. 在电色谱(CEC)中引入场增强进样技术,并与HPLC柱内富集技术结合以使带电溶质得到更好的富集效果。
- Two types of SAM coatings, such as FDTS and OTS were applied to the micromachining, the results have revealed that the SAM coatings not only prevent released stiction but also in use stiction. 并对典型的FDTS和OTS分子膜进行了详细的讨论，研究表明，自组装分子膜不仅能有效防止释放粘附，更能防止工作粘附。
- In this paper,the feasibility of lotus effect applied in MEMS to prevent stiction or reduce friction was proposed and investigated,and approaches of fabricating lotus effect surface,as well as some . 论证了“荷花效应”应用于MEMS领域仿粘减摩的机理,探讨了类荷叶仿生功能表面的制作方法,并给出了初步试验结果。
