您要查找的是不是：
- camera mounting bracket 摄影机固定支架
- The camera mounts on the long side of the bracket. 相机安装在托架的长轴上。
- The 5400R package includes the processor unit, remote head camera, mounting bracket, vibration dampener and 5-millimeter lens extension. 该5400R包中包含中央处理器，远程摄像头，安装支架，振动沮丧和5毫米的镜头延长。
- Groove mark: To attach the Main body to the Mount bracket, align this groove markon the Main body with the wide groove in the CAMERA FRONT side on the Mountbracket. 槽口标记：将机体连到安装弧架上，并将机体上的该槽口标记与安装弧架上的摄像机前面的宽槽对准。
- Install caliper over rotor and into mounting bracket. 在转子上方安装夹制器至固定托架中。
- Wall Mounting Bracket Makes installation quick and easy. 墙上安装支架使得安装迅速容易。
- A wall mounting bracket is supplied with each telephone. 每部电话机都放在墙壁上安装的支架上。
- The camera mounting should burn up entirely because of its smaller size. 摄像机的安装应燃尽,完全是因为它的面积较小。
- This item comes with a mounting bracket and replacement of 4 suctions cups. 听 听 听 听 听 听 听 听 听 听 听 听 This is Brand New Escort windshield mounts.
- Lot 121,a Louis XV Ormolu mounted bracket clock. 编号121，路易十五世镶铝合金框。
- Remove the screws that secure the instrument panel wire harness trough to the airbag rear mounting bracket. 拆去固定仪表板线束槽到安全气囊后固定托架的螺丝。
- The film was taken by a camera mounted on a hang-glider. 这部影片是用摄影机系在悬挂式滑翔机上拍摄的。
- Panel mounting is facilitated by the central connecting pin at the back and a corresponding mounting bracket. 背后的中心连接脚和相应的安装托架方便了面板式安装。
- The facility for panel mounting is provided by a back central pressure connection and a mounting bracket. 背后正中的压力接口和一个安装托架方便了表盘的嵌装。
- Actuator mounting bracket on automated valves is removed by unscrewing hex head screws which hold bracket to valve body. 通过拧松将固定支架固定在阀体上的六角螺栓来拆卸电动或气动阀门的执行机构安装支架。
- Adjust the Mounting Bracket so that the Sensor sits flush against the Cover Plate. 请调整安装架使得感应器与盖板处于合适的位置。
- Combines Multi-Mount Valve Mounting Bracket and Multi-Mount Actuator Mounting Platform into one complete kit. 将多种阀门安装支架和多种执行机构安装平台组合成一个完整组件。
- Insert the supplied screws, nuts and washers through the mounting bracket and tighten. 将提供的螺丝、螺母和垫圈插进固定架的正确位置并拧紧。
- Slide the memory seat module off of the two mounting bracket slide tabs far enough to access and unplug the wire harness connectors. 将存储座位模组滑离两个安装支架滑式舌片，直至足以够着并拔下线束接头。
- Mounting brackets shall be of stainless steel construction. 安装平台应该采用不锈钢结构。
