您要查找的是不是：
- Brass valve body parts (fluid machine, electric machine, electronic parts, automobile parts, air-cond machine. 黄铜零件锻制品(流体机械，电机机械，电子零件，汽车零件，空调机械
- brass valve body 黄铜阀体
- Attach threaded end of stem to the brass valve arm. 将杆螺纹端附加到黄铜臂上。
- Remove the body bolts from the valve body. 从阀体上拆卸阀体螺栓。
- Lift retainer and check assembly from valve body. 从阀体内取出护圈和止回阀总成。
- Screw the cover onto the valve body. 将阀盖旋在阀体上。
- Turn handle to be perfectly perpendicular to valve body. 将手柄旋转到与阀体完全垂直的位置。
- Attach brass valve arm to plastic valve arm with thumbscrew provided. Make sure serrations mesh properly. 用所提供的翼状螺丝将黄铜阀门臂附加到塑料阀门臂上。确保锯齿啮合适当。
- Remove the body bolts from valve body using Allen Key. 采用内六角扳手从阀体上拆卸阀体螺栓。
- Installation suggestion: valve body vertical and upward. 建议安装方式，阀体垂直向上。
- IMPORTANT! Flow must always be in direction of arrow on valve body. 重要提示！水流流向必须与阀体上的箭头方向一致。
- Insert valve body through mounting hole and seat lugs. 将阀体插入安装孔和密封连接盘。
- Press stem/ball into valve body and remove from open end. 将阀杆/球体压入阀体内，并且从开口端卸下来。
- The top of retainer must drop just below threads in the valve body. 护圈上方必须放置在阀门阀体螺纹以下。
- Slide one half of the splash guard into the groove on the relief valve body. 将防溅保护的一半滑动到安全阀阀体的沟槽上。
- We can supply different brass valves such as ball valves, gate valves, and stop valves. 我们可以提供不同的黄铜阀门，如球阀，闸阀，停止阀。
- Dezincification is normally associated with brass valves where the zinc content exceeds 15%. 脱锌现象通常发生在锌含量超过15%25的黄铜阀门上。
- Ningbo Rian Valve Co.,Ltd was founded in 1989 with self imports and exports right,specializing in manufacturing all kinds of brass valves in China. 宁波日安阀门有限公司创建于1989年是中国铜阀门专业生产企业，拥有自营进出口权。
- Install valve in the direction of the flow arrows on the valve body. 按照阀体上的箭头方向安装阀门。
- Assigning the ideally fitted wedge, ground and lapped, to proper valve body. 将研磨后的楔板分配到最适合的阀体上。
