您要查找的是不是：
- boost pressure gage 增压压力表
- boost pressure gauge 升压压力表
- On the right hand side of the instrument panel, there is a display that indicates boost pressure, water temperature and fuel level. 在仪表板右边有一个指示增压压力水温和油位的显示器。
- Two-way cartridge valve control systems and fittings, agent of pressure gage, sensor and relays. 二通插装阀系统及其附件、代理压力表、压力传感器、压力继电器。
- The wastegate is a valve that allows the exhaust to bypass the turbine blades.The wastegate senses the boost pressure. 垃圾门实际上是一个阀门，它使尾气能从涡轮叶片的旁边流过（不经过涡轮），垃圾门通过传感器监测增压的压力。
- These things may include a boost gauge and other gadgets that need a boost pressure signal. 这些事情可以包括一只帮助计量器以及需要一个增压信号的其他小器具。
- Open the inlet stop valve gradually until the reducing valve takes control as indicated by the delivery pressure gage. 逐步开启进口截止阀,直到输出压力表上显示减压阀开始其控制作用为止。
- Right here the MKB software calculates the perfect injection time, duration and boost pressure. 就在这里，MKB软件精确计算燃油喷射点、持续时间及喷射压力。
- APG-FC2 suspension fork is the lightening Air-spring suspension fork.It has a pressure gage to show the pressure value. FC2避震前叉是一种可自给调整压力且可显示压力值的轻量化气压式避震前叉。
- The modified roots type is the best type of supercharger to use until the boost pressure exceeds 13 PSI. 被修改的根类型是直到增压使用的增压器的最好类型超过13PSI。
- CONNECT AN OIL PRESSURE GAUGE IN ITS PLACE. 在这个位置连接油压计。
- Watch pressure drop on pressure gauge. 手表压力在压力标准度量上降低。
- Meaning of pressure gauge readings. 压力计刻度的含义。
- The boost port is the connection for things you may want to install with the supercharger that need to have access to positive boost pressure from the supercharger. 帮助港口连接给事情你可能想要安装与需要能接触积极的增压的增压器从增压器。
- Gas pressure gauge and fill valve. 气体压力表及充气阀。
- OF DIRECT MOUTING DIAPHRAGM SEALED PRESSURE GAUGE. 隔膜压力表直接安装图。
- This is the fitting that you want to connect thing like the boost gauge to so that they will have access to boost pressure. 这适合，你想要对如此象帮助计量器一样连结事情他们将能接触增压。
- The pressure and speed for each mechanism can be adjusted and the pressure gage is also installed at the outside moue conveniently. 各机构之压力与速度均可由外部调整,压力表亦配置在机台处部,使机械操作与调整更方便。
- Please observe the pressure gauge when pump starts. 泵刚启动后观察压力表状况。
- The port labeled as Boost Port 2 is also a port that will provide access to boost pressure, but it is normally connected to the bypass valve actuator and should be left alone. 港口被给贴标签帮助港口2也是将提供进入的途径的一港口推进当时压力，但是它通常连接支路阀门作动器并且应该被单独留下。
