您要查找的是不是：
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- bond strength test 搭接强度试验
- It can be concluded that the bond strength of Tyrian/One-Step Plus has a comparable high value under microtensile test. Tyrian/One-StepPlus黏结系统的黏结性能最好。
- Concrete bending tensile strength test machine. 混凝土抗折机。
- Bond strength is an important parameter for wafer bond. 键合强度是关系到键合好坏的一个重要参数。
- Bond strength you can test up to through the use of the avulsing test, or test a consistent reference samples. 粘合强度可以通过采用测试盘进行剥离测试，或测试某个质量稳定的参考样本。
- Effect of Distance between Clamp and Cutting Notch on Plywood Bond Strength Testing 夹具与槽口距离对胶合板强度测定结果的影响
- Methods: The bond strength of Au - Pt, Au - Pd, Ag - Pd and Ni - Cr alloys were determined by means of pull - through test. 方法:通过金瓷界面间的剪切强度测定,观察金铂合金、金钯合金、银钯合金及镍铬合金的金瓷结合强度。
- Standard forms for concrete bending tensile strength test cube. 混凝土抗折试模。
- By means of the orthogonal test and the variance analysis, the influence of dry blasting steel grit parameters on blasting result and bond strength of arc spraying was conducted. 应用正交试验法对干喷钢砂工艺参数对喷砂效果和结合强度的影响进行了试验研究,确定了优化的干喷钢砂电喷涂工艺规范。
- Standard forms for concrete compressive strength test cube. 混凝土抗压试模。
- Standard forms for grout compressive strength test cube. 砂浆试模。
- Based on the 21 specimen of AFRP concrete under different temperature,an test was designed and conducted to investigate the effect of temperature on the shear bond strength. 用21个试件,测定了芳纶复合材料(AFRP)与混凝土之间的抗剪粘结强度,通过改变温度,研究了温度对AFRP与混凝土间抗剪切粘结强度的影响。
- The bond strength experiment of dogtooth exposed to pulsed Nd: YAG laser[J]. 引用该论文 朱建中;黄炜;许肖杰;林斌;陈钰清;顾锡荣.
- Xeno III Adhesive provides bond strength comparable to total etch systems. 异种三胶粘剂粘结强度可比提供总额蚀刻系统。
- shear bond strengths test 热循环
- For flexural strength test of cement specimen and other nonmetallic material. 用作水泥或其它非金属脆性材料试块的抗折强度测定。
- Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied. 同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
- Bond strength between tooth and base bracket with two bracket base designs: An in vitro comparative study. 两种底板托槽体外粘结强度的对比研究。
- The shear bond strength of titanium and its alloys with SOLIDEX veneering resin. 钛钛合金牙粘结复合树脂。
