您要查找的是不是：
- Keywords bolted flanged joint;tightness;gasket;stress distribution;FEA; 螺栓法兰接头;紧密度;垫片;应力分布;有限元分析;
- The traditional design criteria for bolted flanged connections was based on the strength failure, which cannot evaluate in quantity the tightness of flange joints. 传统的法兰设计依据强度失效判据,不能定量估计法兰接头的紧密性。
- Finite Element Analysis on the Bolted Flanged Joint Subjected to External Bending Moments 承受外弯矩作用的法兰接头有限元分析
- Advances in Bolted Flanged Joints Subjected to External Loads 外载荷下螺栓法兰接头的研究进展
- bolted flanged joint 螺栓法兰连接
- Guidelines for Pressure Boundary Bolted Flange Joint Assembly 压力界限法兰连接接头组件的导则
- Design and Development of Drawing Automatic Generation in Bolted Flanged Joints System 螺栓法兰连接静密封系统中图形自动生成方法的研制与开发
- Finite Element Analysis of Bolted Flange Joint under Transient Temperature Field 螺栓联接法兰瞬态温度场分析
- Three-dimensional Finite Element Analysis of Bolted Flange Joint with Transient Temperature 螺栓法兰接头瞬态温度三维有限元分析
- Advances of Research on Bolted Flange Joints at Elevated Temperature 高温螺栓法兰连接研究进展
- The analysis result shows that the influence of the additional flexural torque on the tightness of the bolted flanged connection structure is comparatively ... 分析结果表明,附加弯矩对螺栓法兰连接结构的紧密性有较大影响。
- FLANGED:There are several steps to follow to make sure that a flanged joint will be properly assembled. 法兰连接:为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
- There are several steps to follow to make sure that a flanged joint will be properly assembled. 为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
- Valves are to be of the pneumatically operated jacket pinch type with integral flanged joint ends. 阀门是气动操作套管夹紧类型，带整体法兰连接装置。
- Joint type of this valve is flange joint. 本阀连接方式为法兰连接。
- All that is required is two gaskets in place of the one normally used in a flanged joint. 只需用两个垫圈替代通常用在法兰接头上的一个垫圈即可。
- Based on relevant standards and specifications, professional knowledge and experts' experiments about static sealing, the expert system for bolted flanged connection design is developed. 依据标准规范以及专业知识和专家经验建立了静密封设计专家系统。
- Valves are to be of the pneumatically operated jacket pinch type with flanged joint ends. 阀门是气动操作套管夹紧类型，带法兰连接装置。
- The leakage event of a non-asbestos gasket was taken place at the manhole flanged joint of a boiler after more than one-year service. 一台废热锅炉人孔用非石棉纤维橡胶垫片服役一年多后发生泄漏。
- According to the gasket stress, the external bending moments and the tightness of flanged joint are related based on the tightness calculating method of PVRC. 基于PVRC紧密性的计算方法,以垫片应力为判据,关联了外弯矩与接头紧密度之间的关系。
