您要查找的是不是：
- Repeat the first three steps above for initializing the master node. 重複前面初始化主節點的前三個步驟。
- The master node assembles the results, further distributes work, and so on. 主節點收集結果,並繼續分發任務,依此類推。
- In a typical setup, the master node is where the applications are initiated. 在典型的設置中,應用程序在主節點上開始運行。
- ERROR: MASTER NODE 26 INSTANCE FIRSTONE IS NOT ON THE AXIS OF SYMMETRY. 可是我的26節點明明就在對稱軸上啊！
- The master node divides the work between several slave nodes. 主節點負責將任務劃分到多個從節點上。
- There is a slight chance that each node will need to be rebooted while working on a job submitted by the master node. 各個節點在執行主節點所提交的作業時,需要重新引導的機率較小。
- This application shows the processes that have been migrated from the master node to the drone. 這個應用程序顯示已經從主節點遷移到從屬節點的進程。
- Verify that port 691 is not restricted by a firewall by initiating a telnet session to port 691 of the affected servers and the master node. 通過啟動與受影響的伺服器和主節點的691埠的telnet會話,確認691埠未被防火牆禁用。
- The first server that is installed into the routing group is automatically designated as the master node or routing group master. 路由組中安裝的第一台伺服器自動被指定為主節點或路由組主伺服器。
- The experimental system on 380V electrical power is set up through designing.The data is sampled in two different loads.At the same time RTU node control the switch opening and cutting. 經過設計，建立了一個實驗系統在380V電網上進行了實驗，測出了兩種不同負載下的數值，並由RTU實現對一些開關的分、合閘控制。
- In Exchange 2003, if msExchRoutingMasterDN points to a deleted object, the master node relinquishes its role as master and initiates a shutdown of the master role. 在Exchange 2003中,如果msExchRoutingMasterDN指向已刪除的對象,則主節點會放棄其主伺服器的角色,並關閉主伺服器角色。
- In order to cornect between CAN bus and LIN bus, I designed the CAN/LIN data exchange gateway based on PIC18F248.That is the CAN node, as well as is the LIN master node. 為了使CAN網路和LIN網路能夠互連互通,設計了基於PIC18F248的CAN/LIN數據交換網關。
- To do this, they use the ncacn_ip_tcp value in the network address attribute of the Exchange server to generate the SPN for the master node by calling DsClientMakeSpnForTargetServer. 為此,它們使用Exchange伺服器的網路地址屬性中的ncacn_ip_tcp值並通過調用DsClientMakeSpnForTargetServer來為主節點生成SPN。
- In terms of the terminal node controller to connect the transmitter-receiver and computer that has RS-232,this paper explains the method of packet radio communication. 結合終端結點控制器、收發設備和具有標準RS-232介面的計算機連接方案,說明了實現無線分組通信的方法。
- In the TT-FPS scheduler, firstly, the master node should send synchronization message, which also introduces time-triggered mode, to set up the uniform clock benchmark in the system. TT-FPS調度器中主節點首先通過時間觸發的方式發送同步消息,建立整個系統的統一時間基準,在接收到同步消息后,主/從節點各自均以事件觸發的方式控制待傳輸消息發送任務的執行。
- The basic idea is to temporarily convert the nodes into a Linux system and from there they join the master node as member of a cluster. 其基本思想是將節點臨時轉換為Linux系統,然後作為集群的成員連接到主節點。
- In the mode of master-slave, the PC with CAN adapter performs as the master node and the other five Field controllers perform as the slave nodes. 在主從方式下，帶有CAN適配卡的PC機為主節點，其餘5個現場控制器為從節點。
- The paper shows the design and implementation of the software and hardware of the network node controller in a new Packet Radio Network. The controller serves as the Network Sublayer and Data Link Layer device of the Packet Radio Network. 本文介紹了正在研製中的新型分組無線網節點控制器的軟硬體設計與實現，該節點控制器用於完成分組無線網網路子層和數據鏈路層的功能。
- As S7-300/400 series PLC(Programmable Logic Controller) is node controller based on field bus net,it is difficult to develop the communication software on Lab Windows/CVI platform for its privacy of communication protocol. 西門子S7-300/400系列可編程邏輯控制器(PLC)是基於現場匯流排網路的節點控制器,其通信協議不開放增加了在Lab Windows/CVI等平台上開發通信驅動軟體的難度。
- The cruel master beat his slaves with a whip. 殘酷的主人鞭打他的奴隸。
